Dryer Timer - 60Hz

PartSelect Number PS394424

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

    $177.77
  • You Save

    $29.63
  • Your Price

    $148.14
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 6 people found this instruction helpful

Parts Used

  • Dryer Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Socket set

CustomerRobby from Princeton LA

Intermittent operation

First, let me say I am absolutely not an appliance expert by any means. In fact, I figured out what part I needed by reading others comments on this site!! Repair was very easy. I disconnected the dryer from the wall plug. Used a socket set to remove the access panel where the dryer timer was. Then before I removed the old timer I took the wires off and connected the new one to make sure I put them on properly. I used a small pair of pliers to remove a few of the wires since a few were snug. Then I simply removed the timer dial from the front, removed the old timer(2screws), and installed the new one. Finally, replaced the rear panel and plugged it back in. Worked like a champ!!! No more wiggling the dial to try to get it to turn on. AND, the wife was most impressed and very happy!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Dryer Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerDaniel J from Morristown NJ

Old timer would not work on all settings

Unplugged dryer from outlet, removed 6 screws at the back to expose timer, pulled knob off of timer, removed 2 screws that held timer in place, carefully noted where all the wires go from old one to new one, changed (8) all the wires over to the new timer, put 2 screws in to hold timer in place, replaced knob and put 6 screws back in for back cover, plugged in Dryer. DONE! Works like a charm. All the settings work now so if we want fluff dry without heat, we can do it. Very easy installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2