BBB A-Plus

Upper Rack Wheel and Mount Assembly

PartSelect Number PS393265

Sold Individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

In Stock

  • Compare At

    $4.57

  • You Save

    $.76

  • Your Price

    $3.81
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-10 of 10

 

8 of 10 people found this instruction helpful

Parts Used

    • Upper Rack Wheel and Mount Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerTeresa from Smyrna TN

Top rack front wheel broke.

Pulled out dishwasher. Took out old screws. Unsnapped end of rack slid new wheel in and attached to side. Very Very easy. It was great to get the part so fast and take care of this repair ourselves.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 10 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerKevin from Hurst TX

Top dw rack fell off of rollers

Amazingly, this not-too-old dishwasher's plastic parts that hold the top rack onto the sliders became brittle (a real design flaw, in my opinion) and the tabs that held the rollers in place all broke off. With the right parts and the great instructions on this site, the repair was fairly easy and we saved a lot of $$ by not having to call for service. Just follow the instructions...

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerShaun from Justin TX

Wheels holding top rack broke

Pull the dishwasher out, unscrew the old wheel assemblies and screw in the new ones, that easy, anyone could fix this problem, it is a poor deisng though, the inside of my dishwasher is stainless and the only thing to go bad are the plastic parts

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

    • Upper Rack Wheel and Mount Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerChris from North Little Rock AR

Wheel tub snapped off

Repair was easy - The only reason that I am writing this is to brag on you guys for shipping the part as promised and on time. Had i next day which was most important.

Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

    • Upper Rack Wheel and Mount Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

Customerjoseph from bethlehem PA

Replace upper wheel and mount assembly

Disconnect water line since it was a hard tubing, not flexible. Unattach the washer from the counter top. Roll out the washed about 15 inches. Replace the wheel assemblies by removing 2 bolts from each assembly, then replacing the parts and bolts. Reverse the above procedures.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Upper Rack Wheel and Mount Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBrad from Granby CT

Wheel to hold top rack broke off

It was a real easy repair. I unscrewed the dishwasher from the counter top. Slid it out from the cabinet about 8 inches. Unscrewed the wheels from the side of the dishwasher and screwed the new one in. It took about 15 mins.
The part came in two days from order.
Real easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Upper Rack Wheel and Mount Assembly

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerRobert from Fallbrook CA

Upper rack roller broke of mount

pulled out the dishwasher, removed the two bolts and installed the new mounts with the same bolts, easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Upper Rack Wheel and Mount Assembly

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerBrad from Puyallup WA

Wheel mounts broke

The parts I received were similar but not an exact match to the original part. The original part is no longer produced. The original part used threaded screws to mount the assembly to the dishwasher body. The replacement part had and open "shaft" that was approx 3 times the size of the threaded screw used previously. My solution for this change: I purchased 8-32x1" stainless steel carriage bolts with matching nut. The head of the bolt fit nicely within the opening of the wheel mount. I salvaged the rubber washers out of the old parts and used them for reassembly. Inconvenient, but problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMichael from Eugene OR

Upper tray supports broke/small wheels

Ordered Tray parts, 4 tray and 4 supports on washer wall. Replaced all moving parts for upper tray, works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 19 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:1- 2 hours

ToolsNutdriver, Socket set, Wrench set

CustomerLaurent from Naperville IL

Noisy motor and bearing

just replace the motor unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-10 of 10