393129-1-M-Whirlpool-8269117-Door-Handle.jpg
393129-1-S-Whirlpool-8269117-Door-Handle.jpg 393129-2-S-Whirlpool-8269117-Door-Handle.jpg

Door Handle

PartSelect Number PS393129

This part is no longer available in white or biscuit.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Will not start.
  • Door won’t close.
  • Compare At

    $49.01
  • You Save

    $8.17
  • Your Price

    $40.84
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Release Spring

Part Number 392963

This spring is located in the door section. Sold individually.

$3.96
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 25 reviews What's this?
16-25 of 25
 

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJessica from Gilmanton NH

Door handle broke

Unscrewed top 6 screws to pull away panel and replaced handle and attached the springs. Screwed panel back in. Handle is made of plastic, which is why is breaks so easily. Also product numbers are confusing using both ones and the letters I and L.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMark from Storrs CT

Handle pivot cracked off, so dw would not lock closed

removed the top panel (6 screws), popped of the old handle, poppd on the new one, added the springs, and reassambled top panel. The nly thing that would have been easier is if the top panel did not need screws! Took 5 minutes to complete. Good self-service design.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers

Customerthomas from Littleton CO

Dishwasher door would close but not latch

The door catch clearly was not acutating correctly when the door handle was depressed. I removed the 6 screws (star pattern, not phillips) from the top of the door to allow access to the door handle and catch. the door handle is made from a thin and poorly constructed plastic piece with two arms that attach to the body of the latch. The latch has an electrical switch that has two wires attached to it. Note the location of the wires before you disconnect them. remove the latch assembly and door handle together. Remove the damaged door handle. Note where the return springs are located on the handle and latch. Replace the new handle on the latch mechanism, attach the springs, put the complete mechanism in the door and replace the screws. Finding the problem took 5 minutes and the remove of the top of the door. Waited 4 days for the part, 10 minutes to install the new part and back in operation

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerDavid from Buffalo NY

Play in handle

I removed the same six torques screws needed to replace to touch panel. Snapped the new handle in place. Replaced the springs. Reinstalled the touch panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerKenneth from Henderson NV

Pivot point broke off latch handle

I removed the 6 screws that hold the top door panel in place. Then pulled the door panel up but didn't disconnect the electrical plugs. I popped the latch loose from the cover and removed the door switch from the latch mechanism. I then snapped the broken latch handle from the latch mechanism and snapped the new one in place. I replaced the door switch with a nut driver and snapped the latch and handle assembly back in place to the door panel. I slid the upper door panel in place on the door and replaced the 6 screws. It was a simple repair and the new parts fit perfectly. I must commend PartsSelect on their delivery service. I ordered the parts on Saturday and received them on Tuesday during the busy Christmas week. It made my job easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

Customergerald from park city MT

Handle broken

removed panel behind handle. removed harness/handle assembly. insalled new handle. reinstalled backpanel it worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

Customermike from bristol CT

Door latch broken

THe upper portion of the door was removed to gain access to the latch assembly.Removing wires and loosening nuts and micro switch screw allowed me to remove the assembly. The new unit fit perfectly and after repacing the wiring, nuts and screw. The upper prtion of the door was reattached. It now works as good as new. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTimothy from Geneva IL

The door handle was loose and not returning to it's home position

Took the top 6 screws out of the door and removed the top front panel. Saw that the handle was broken and one of the springs had fallen into the door. Ordered the replacement parts (diagrams on the site were great!). Once received, easily replaced the handle and the springs. Tested and everything worked like a champ. It literally could not have been easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDiane from Oceano CA

Handle broke and dishwasher was unusable

My husband took off the old handle, we found the new part, it was delivered within a day and went back in with no difficulty. Easiest repair!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsWrench set

CustomerJohn from Lutherville MD

Door latch broke inside the dishwasher

1) unscrew the top part of the dishwasher which contains the control panel
2)remove the spring attached to the latch
3)removed the broken latch and replaced it with the new latch and connect the springs to each side of the latch
4)attach the panel cover and screw it back together with the 6 screws

Help other customers find the most helpful instructions.

Were these instructions helpful?

16-25 of 25