| |
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerEdward from St. Johns FL
Parts became damaged from normal use
Determined parts needed to be replaced, found your site via search engine, ordered the parts - they arrrived EXTREMELY quick, and I installed. Great experience with your organization overall.
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHope from Plainfield IL
Spray tube end broken.
unscrewed spray arm.
snapped off inlet holder.
snapped on new inlet holder.
screwed on new spray arm.
presto. it works.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerTerry from Pevely MO
Tinerow clips were broke
No problem. Just snapped new parts in place. My wife has been after me for 2 years to fix this. I had it looked up on the internet an ordered and paid for in 10 minutes 3 days later the parts arrived and in 10 minutes job was done.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTimothy from Merritt Island FL
Had a broken part
The parts I ordered came in right on time and were easily replaced. Thanks.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerLon from Joliet IL
The upper spray arm mounying bracket broke
I used a nut driver to remove the broken part. I should have marked the original position of the part beore I removed it. I then needed a square drive screwdriver to complete the disassembly. A little trial & error and I found the correct location to do the remount.
I also tried to replace one of the rack rollers, but ordered the wrong part. The photos online weren't quite enough for an easy ID of the correct part. I needed a roller with a right angle mount.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from Louisville KY
Tube holder lost its shape and began hanging preventing upper tray from closing
repair was simple and easy; just make sure you install the holder in the same direction and on same upper-tray prongs to prevent having to remove them to switch around (ensures spinner works properly).
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDarren from Cincinnati OH
Spray arm feed tube and holder were damaged.
Unclipped broken holder from top rack. Removed one screw from feed tube and pulled tube off. Replaced with new parts that fit perfectly.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTracy from Haskell NJ
The mount broke off in the upperdish rack wash assembly
I took the whole upper dish rack wash assembly apart removed the piece of broken mount and replaced with a new mount. screwed everything back together and added the Water Inlet Tube Holder that I had been missing previously. That is probably what caused the mount to wear in the first place. Anyway easy fix and good as new working beautifly!!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLinda from Hernando FL
Spray arm feed tube was completely shredded by a food processor blade
simply removed the old feed tube and the cracked holder, then replaced them with the new parts. machine works like new.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJulie from Christiansburg OH
Had to replace nut that held on the bottom sprayer and replace the water inlet tube
I had already removed the old parts so when the new parts arrived, I just attached the water inlet tube holder and put the nut on the top of the sprayer assembly and it was good to go!!!! I ordered the parts one day before 3:00 and they were delivered the next day!!!! Unbelievable service!!!! Thanks and I am a very satisfied customer!!!!
Julie Welty
|