393013-1-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount
393013-1-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount 393013-2-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount 393013-3-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/HTGMLOGO.gif

Upper Dishrack Wheel Mount

PartSelect Number PS393013

This part is located on the top dishrack with two per side. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Door won’t close.
  • Not cleaning dishes properly.
  • Door latch failure.
  • Compare At

    $16.86
  • You Save

    $2.81
  • Your Price

    $14.05
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 24 reviews What's this?
1-5 of 24
 

495 of 505 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJason from Todd, NC

Worn dishrack wheel mount

This wheel mount broke from normal use and made the upper dish rack disconnect from the sliding arm that extends it outside the dishwasher body so that you can fill it. The part was delivered quickly and was easy to install using just a screwdriver to loosen the retainer clip on the end of the extension slide. Once the retainer clip was removed, the new part was slid into place and clipped onto the rack. The install was complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

380 of 387 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerElizabeth from San Francisco, CA

The wheel mount had broken so that the wheel was disconnected from the mount on the upper rack, making the rack unstable.

I had to fiddle with the mount a bit to get it on the rack properly. Then I pulled back slightly on the inner part of the end piece of the track while also pulling the top of the piece back and released the inner tip of the piece, allowing the end piece to be removed. I placed the new wheel in the track and replaced the end piece.

Super easy and a small fraction of what a repairman had told me the part would cost.

Help other customers find the most helpful instructions.

Were these instructions helpful?

103 of 180 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerLee from St. Clair Shores, MI

Stationary upper dishrack wheel mounts broken

Each Molded one-piece plastic upper dishrack wheel mount includes a tiny plastic spring clip which hold the mount in place on the upper dish washer rack.
These clips become dry and britle over time and snap off.
Because they are molded in the wheel mount itself you have to replace the entire wheel mount assembly

Help other customers find the most helpful instructions.

Were these instructions helpful?

87 of 151 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerKevin from Hurst, TX

Top dw rack fell off of rollers

Amazingly, this not-too-old dishwasher's plastic parts that hold the top rack onto the sliders became brittle (a real design flaw, in my opinion) and the tabs that held the rollers in place all broke off. With the right parts and the great instructions on this site, the repair was fairly easy and we saved a lot of $$ by not having to call for service. Just follow the instructions...

Help other customers find the most helpful instructions.

Were these instructions helpful?

81 of 144 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerNancy from Gilbert, AZ

The upper rack wheels had crumbled

the parts only took a few days to arrive, and it took me about 2 minutes to install them-no tools were required. i took out the end plugs from the slider bars, slipped out the old broken wheel parts, snapped on the new ones, slid the upper rack into the slider assembly, popped the end plugs back into place and VOILA!!

aside from the expense of the parts- much better to go this route rather than hire a repair guy to do it!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 24