393013-1-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount
393013-1-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount 393013-2-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount 393013-3-S-Whirlpool-8268743           -Upper Dishrack Wheel Mount

Upper Dishrack Wheel Mount

PartSelect Number PS393013

This wheel mount is sold individually. It is located on the top dishrack with two per side.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Unusual Noise.
  • Not cleaning properly.
  • Door won’t close.
  • Door latch failed.
  • Compare At

    $20.82
  • You Save

    $3.47
  • Your Price

    $17.35
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 24 reviews What's this?
1-15 of 24
 

465 of 469 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJason from Todd NC

Worn dishrack wheel mount

This wheel mount broke from normal use and made the upper dish rack disconnect from the sliding arm that extends it outside the dishwasher body so that you can fill it. The part was delivered quickly and was easy to install using just a screwdriver to loosen the retainer clip on the end of the extension slide. Once the retainer clip was removed, the new part was slid into place and clipped onto the rack. The install was complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

368 of 372 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerElizabeth from San Francisco CA

The wheel mount had broken so that the wheel was disconnected from the mount on the upper rack, making the rack unstable.

I had to fiddle with the mount a bit to get it on the rack properly. Then I pulled back slightly on the inner part of the end piece of the track while also pulling the top of the piece back and released the inner tip of the piece, allowing the end piece to be removed. I placed the new wheel in the track and replaced the end piece.

Super easy and a small fraction of what a repairman had told me the part would cost.

Help other customers find the most helpful instructions.

Were these instructions helpful?

98 of 175 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerLee from St. Clair Shores MI

Stationary upper dishrack wheel mounts broken

Each Molded one-piece plastic upper dishrack wheel mount includes a tiny plastic spring clip which hold the mount in place on the upper dish washer rack.
These clips become dry and britle over time and snap off.
Because they are molded in the wheel mount itself you have to replace the entire wheel mount assembly

Help other customers find the most helpful instructions.

Were these instructions helpful?

79 of 142 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerNancy from Gilbert AZ

The upper rack wheels had crumbled

the parts only took a few days to arrive, and it took me about 2 minutes to install them-no tools were required. i took out the end plugs from the slider bars, slipped out the old broken wheel parts, snapped on the new ones, slid the upper rack into the slider assembly, popped the end plugs back into place and VOILA!!

aside from the expense of the parts- much better to go this route rather than hire a repair guy to do it!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

76 of 137 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerHeather from Trinity FL

One mount had broken and our top rack fell down

We replaced all four. You unclip the two front parts on the top drawer to pull it all the way out of the dishwasher. Unsnap the old mounts and clip the new ones on. Slide the top drawer rack back in and replace the two front clips.

This was truly an easy repair!

Help other customers find the most helpful instructions.

Were these instructions helpful?

75 of 139 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerKevin from Hurst TX

Top dw rack fell off of rollers

Amazingly, this not-too-old dishwasher's plastic parts that hold the top rack onto the sliders became brittle (a real design flaw, in my opinion) and the tabs that held the rollers in place all broke off. With the right parts and the great instructions on this site, the repair was fairly easy and we saved a lot of $$ by not having to call for service. Just follow the instructions...

Help other customers find the most helpful instructions.

Were these instructions helpful?

73 of 135 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMELINDA from CINCINNATI OH

Clip thing that attaches rack to wheel on track broken.

Took stop off end of track by smooshing spreader things together with butter knife, so they would fit through holes.
Maneuvered wheel on track and clip on rack. Put the stop back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

69 of 135 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerShaun from Justin TX

Wheels holding top rack broke

Pull the dishwasher out, unscrew the old wheel assemblies and screw in the new ones, that easy, anyone could fix this problem, it is a poor deisng though, the inside of my dishwasher is stainless and the only thing to go bad are the plastic parts

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerSusan from Louisville KY

Detergent dispenser would not stay closed

After reading info on your web site, logged onto YouTube and watched the video about the installation of the detergent dispenser. I watched it several times while making the repair to get it right. The only difficult part was getting the old detergent dispenser off because the screws were difficult to reach with the drill, but persistence won out. I had called the local repair place for KitchenAid appliances several months ago & was told I could not replace the detergent dispenser myself because it was "electronic". Sounded like a challenge to me. Replacing the stationary upper dishrack wheel mount was easy and took about 2 minutes. So glad it went so well, thanks for the help.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDaniel from Wakefield MA

Plastic wheels on top rack dried out and broke

Snapped off old plastic wheel units and snapped new one one and finally put it back onto the track

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWilliam from Brooksville FL

The spindle that holds the wheel broke.

I took the end cap off the sliding rail and slid the
new wheel/bracket into place. It was a snap..lol
(it actually snaps into place).

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStephanie from Concord NC

Wheel broken off of top rack of dishwasher

The phone staff was so patient and helped me with the schematic and my model number to be sure that I had the right parts. I did the repair myself and saved so much money. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerJames from Norwich CT

Bad wheel

Replaced mount

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Upper Dishrack Wheel Mount

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerbarbara from west chester PA

Broken wheel mount

removed track stops, replaced wheel mount, replaced stops

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAnn from Sarasota FL

Two parts were broken.

Opened the box. Took the broken ones out of the dishwasher. Put the new ones in. My 7-year-old fixed it herself. :)

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 24