This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You may need to replace this part if your dishes are not being cleaned properly, your appliance is particularly noisy, or you are noticing draining problems. The tools you will need to make this repair include a number 20 and a number 15 torque screwdriver, a small flat blade screwdriver, and a pair of needle nose pliers.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Kenmore Dishwasher Dishwasher Chopper Assembly
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Noisy | Not draining | Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# W10083957V replaces these:
AP5983779, 8268383, W10083957
Customer Reviews
Average Rating:
★★★★★
★★★★★
44 Reviews
4.7
Filter By Rating:
5 Stars
35
4 Stars
6
3 Stars
2
2 Stars
0
1 Star
1
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Karl S - September 9, 2023
Verified Purchase
Not easy to put in- but has worked very well
Not easy to put in- but has worked very well
★★★★★
★★★★★
Hugh M - April 7, 2022
Verified Purchase
Steve's videos are the best
I've done a couple of previous repairs to my dishwasher with parts from PartSelect, and was always happy (and successful!) But this chopper replacement was the most complex appliance repair I've attempted (yeah, yeah, don't start) and I was a little intimidated.
Steve makes SUCH GREAT VIDEOS. There were multiple steps to this repair where anybody else (including my dad...) would have said "it's just one of those things, after you do it a coupla times you'll get a feel for it" - but no, Steve steps patiently through those steps on camera in a way that let me understand how to do it and what it should feel like. Amazing attention to clear, effective instruction.
Side note: the new chopper seems exactly equivalent to the old one in every way - materials, fit & finish.
Replaced the chopper, seemed to work but my spouse heard a maybe new noise - so we took it apart, cleaned the new chopper (cat hair? what??) and put it all back together a 2nd time - following the video. Works great. Fan for life.
★★★★★
★★★★★
J J - September 29, 2021
Verified Purchase
easy repair
needed to watch utube video on how to install. it was an easy fix. Pay attention to how the old part comes out of the machine. the directions do not provide clear orientation
★★★★★
★★★★★
Cathy A - March 13, 2021
Verified Purchase
Easy Repair
The part came fast, great condition. Was easy to install. Helpful Video!!
★★★★★
★★★★★
Kate M - February 16, 2021
Verified Purchase
The right part and helpful installation videos!
Our dishwasher stopped cleaning the too rack and after ruling out a clog we found some suggestions that it could be a broken chopper. We used a Parts Select video to disassemble and then we're able to replace the part for a fraction of the coat of paying someone to come. The videos were just as valuable as the part, super helpful. Our dishes are clean again!
★★★★★
★★★★★
Kelly L F - February 12, 2021
Verified Purchase
Easy done and Quiet.
The part was perfect and fit the same. It was easy to install.
★★★★★
★★★★★
Nina F - January 14, 2021
Verified Purchase
Excellent part with fast shipping
Really appreciated how easy it was to find the part we needed on the website. The fast shipping and instructions were excellent.
Thank you
★★★★★
★★★★★
LD R - January 6, 2021
Verified Purchase
Dishwasher Chopper Assembly replacement
The part shipped and was received in a timely manner. After watching the install video that was sent with the order confirmation email, I was able to replace without issue.
★★★★★
★★★★★
Steven B - December 29, 2020
Verified Purchase
Part worked as it should. Took a whole week to recieve
Part worked as it should. Took a whole week to get here.
★★★★★
★★★★★
Rob M - October 6, 2020
Verified Purchase
Just what I needed
Part arrived quickly, as pictured. My only difficulty was self inflicted as I couldn't get the part oriented correctly for install. I used the old parts to help me reconstruct and finally figured it out. Dishwasher humming once again
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 64 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishes were not getting clean because upper and lower spray arms were not spraying.
The cause of the problem was that the chopper was worn out. As a result, the chopper screen was clogged with unchopped food bits. This severely reduced the amount of water getting to the circulation pump/impeller. This was what caused the spray arms not to spray. As a result of replacing the chopper, the dishwasher now works like new.
... Read more
As far as how I did the repair, I followed the excellent how-to video provided by PartSelect that you can access when you click on the Chopper Assembly from the Pump and Motor Parts diagram for this dishwasher.
Read less
George from RICHLAND, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher not washing
I looked up 'dishwasher not washing' and it came up with a list of ideas to the problem. I bought the part 'food chopper' for the kitchen aid dishwasher and watched a how to video on YouTube. I realized plumbers don't get paid bc it's hard they get paid bc it's gross. Super easy to do. Dishwasher works great now
Allyson from JACKSONVILLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Reinstall NEW Chopper Assembly
tom boy single Mom- not too difficult! Follow the video and installation procedures. My only problem was lining up the chopper blade, with the need to install on an angle and connect copper assembly with the motor, and align with groove, needle nose pliers did not work for me, due to the fact, pliers seemed to angle the chopper assembly a
... Read morend did not received equal pressure between the blade and the screen.( I did not have a collection of needle nose pliers to chose from) I used a fork to give even pressure distribution and keep the assembly even and it slipped right into position, remembering to line up all connections between the motor and the chopper assembly, the fork give me the ability to angle the assembly. Its like having a new dishwasher, I use the light setting now when washing a load. Saved $$$$$$$ and X-mas is on the way!!! Thanks Parts Direct!!! Will re-order when the next appliance repair occurs.
Read less
Pamela from CRESSON, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top rack of dishes wasn't being cleaned.
All parts were really easy to replace. I just followed the video for each part.
After several weeks of decreasingly clean dishes on the top rack of our dishwasher, I did some digging & found that my chopper assembly was broken (the washer had come off & the parts were loose). I ordered a new chopper assembly here. Once I received it, the entire repair took less than 30 minutes. I removed the old chopper assembly,
... Read moreused a shop vac to remove the excess water & food particles, then reinstalled the new chopper assembly using the instructional video provided. The dishwasher is back up & running like brand new. The top rack is getting cleaned thoroughly once again. PartSelect made the process extremely easy & affordable!
Read less
Bree from GREENVILLE, SC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top rack quick washing water was not spinning throught top
checked all the plactic tubes for clogs used water hose and they worked ok checked into top of pump found chopper assembly had come apart replaced washes like a new one
John from MORGANTOWN, WV
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Chopper assembly failure
If your chopper assembly has a catastrophic failure like mine did, chances are it took out the teeth on the circulation motor as well. This will lead to the teeth on the chopper being destroyed by the impeller as soon as you turn the dishwasher back on. First, follow the instructional video to remove the motor (found on this site on the
... Read more circulation motor page) and chopper assembly (also found on this site on the chopper assembly page). The impeller is screwed onto the input shaft of the motor, and you must keep it from turning so that you can unscrew the impeller assembly. I removed the back cover of the motor (there are four screws holding it on) and held a flat pry bar on the rotating assembly inside the motor to keep it from turning, then unscrewed the impeller from the shaft. Mine came off very easy, but be careful not to let your pry bar slip or damage the motors internals. After that, install the washer and grommet from the impeller seal kit on to the impeller, and screw it back on while keeping the motor from turning with your pry bar. Lastly, reinstall the motor and chopper assembly per the aforementioned instructional videos. The whole thing took around an hour to do, and it is much cheaper than replacing the entire circulation motor.
removed the upper and lower baskets, removed the lower wash arm by rotating the center bearing assembly (its the flat piece in the very center of the lower wash arm) by the way it has a reverse thread...not righty tighty and lefty loosey... it is reverse the normal rotation.. i unlocked the upper arm assembly from it's clip on to mount as
... Read more well as the clip on to mount on the back wall, looking at the very center pump cover strainer, you will see that the assembly that goes from the pump area to the very top of the machine needs to be rotated clock wise where it locks into the pump strainer assembly. now remove the four star type screws from the face of the strainer, now you can lift out the entire bottom of the machine you will see the half round cover in the bottom of the well, remove one smaller size star screw. simply remove the chopper assembly and install the new assembly as indicated in the instructions provided, be sure to use the trick with the open end wrench as per instruction sheet, makes it easy. now follow the bread crumbs you left on the yellow brick road to reassemble.
Read less
michael from CONCORD, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Chopper blade fell off.
Very simple just remove the rakes and then unscrew the covers and pop out the old chopper assembly and replace with the new and then just put all cover back and it works great.
Tonya from RICHMOND, KY
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
After a loud noise the dishwasher quit and would only buzz when the main motor was supposed to be running.
Primarily, I read the instructions on line and watched the great videos explaining the repair. While the DW was out, I decided to change out the Drain Pump and the Chopper Assembly, even though only the Circulation Pump and Motor was my problem. These three items are the primary mechanical wear components and it made sense to me to repl
... Read moreace these items. Perhaps I'll get another 10 years out of the DW. Two notes about the repairs. If you replace the chopper it isn't clear in the video where exactly it fits into the housing as the video mechanic did a great job of blocking the view of this part of the procedure. It took me awhile to figure out the chopper screen didn't go in the narrow trough, but just outside of that trough. Also, to lubricate the gaskets when putting the motor and the drain pump back in, I use a light coating of petroleum jelly. It is a good lubricant to facilitate the insertion of the both pumps. The pumps slid in easily and there were no leaks when I test ran the DW outside of the cabinetry. If you have a modicum of mechanical ability this job is a very simple, straight forward process. Good Luck!
Ask our experts a question about this part and we'll get back to you as soon as possible!
21 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
George
December 16, 2017
I am replacing the chopper assembly. Some of the plastic couplings that connect the chopper blade to the motor broke off. I cannot find them. Can they be passed through the pump system without causing a problem or do I have to take some more components apart to find them? I also have also have 4 upper basket wheel axles that broke off that I cannot find.
For model number KUDS35FXSS4
Hello George,
Thanks for your question. You may want to examine the pump system thoroughly to ensure the coupling parts are not clogging anything. The upper rack axles are only included with the rack adjuster kit, part number PS10064063.
I hope this helps.
We just disassembled the whole assembly and I believe the blades have been wearing out on the metal screen. The part looks identical, except ours has 2 blades instead of 4. Will this one work?
For model number KUDP02FRSS2
Hi Jeremy,
Thank you for your question. This blade is listed under your model number and it will work in your dishwasher. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Billy
November 21, 2019
The chopper assembly shaft end broke off in the chopper. What do I replace? The pump or some other part?
For model number KUDP01LWH6
Hi Billy,
Thank you for your question. If the shaft broke off of the chopper, you will need to replace the chopper assembly. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
December 12, 2019
Chopper screen continues to clog. I replaced the chopper blade but new one also clogs after a month or so. I know it's installed correctly. What pump or shaft does the chopper blade connect to.
For model number 65513213K901
Hi Mike, watch out video here: https://www.youtube.com/watch?v=ERz-tNJUxH0&feature=emb_title. It will show you the correct installation procedure. Thank you for your question and good luck with your repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Gene
January 15, 2018
I replaced the chopper and am certain that it is correctly positioned. It is not engaging the motor shaft. Is it possible that the shaft coupling is damaged or out of position on the shaft?
For model number KUDS30FXBL1
Hello Gene, Thank you for your inquiry. Yes, that does sound like it is the issue. Check it for any cracks and make sure it is snug. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Shelley
December 2, 2019
The chopper that came out of the dishwasher had two blades but when I look at the replacement part it has four blades. Am I ordering the right part for my model?
For model number KUDI02CRBS3
Hello Shelley, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11722146 for the chopper and this will fit your model. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Aubri
January 4, 2018
When the chopper has been replaced, is it normal for the dishwasher to sound much louder with the replacement chopper? Of course I do not know how long the chopper was not fully functional but the dishwasher just seems much louder.
For model number MDB8959
Hi Aubri, Thank you for the question. The chopper should not be making a lot of noise. I suggest taking it apart and checking to make sure it was installed properly. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Rolf
February 17, 2020
Hi, like others i’m wondering if this is the right part for my dishwasher. My oem one only has two blades, while the one in the drawing has four. Thank you so much for the installation video. You guys are rock stars!
For model number Whirlpool GU3200XTPS0
Hi Rolf. This is showing as compatible for your model. please keep in mind the replacement parts are updated by the mfr and may looking different but will have the same functionality and compatibility of the original. Thank you for your question and good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Philippe
May 23, 2019
The dishes in the upper basket does not clean anymore. There is no debris in the rotating arm. The lower basket is always clean. What can it be ?
For model number KUDK03CTSS3 Kitchenaid
Hello Philippe, thank you for inquiring. For this symptom you will want to replace either the Chopper Assembly part PS11722146, the Spinner Kit part PS972316, or the Spray Arm Seal part PS11745444. We hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
September 24, 2019
Does the chopper blade assembly have four or two blades (oem part)?
For model number KUDS01DJSS1
Hi Mike,
Thank you for your question. The chopper blade assembly has 4 blades. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
