391973-1-S-Whirlpool-8183948           -Vent Grille
391973-1-S-Whirlpool-8183948           -Vent Grille 391973-2-S-Whirlpool-8183948           -Vent Grille 391973-3-S-Whirlpool-8183948           -Vent Grille http://www.partselect.com/Schematics/Whirlpool/MFFNRBQR.gif

Vent Grille

PartSelect Number PS391973

This white vent grille mounts on the top of the microwave above the door.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door not closing properly.
  • Compare At

    $47.35
  • You Save

    $7.89
  • Your Price

    $39.46
In Stock
Order within the next 1 hr and 26 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Vent Grille

Part Number 392273

This black vent grille mounts on the top of the microwave above the door. Can be used on stainless models.

Order within the next 1 hr and 26 mins and your part ships today!
$24.45
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 36 reviews What's this?
 

91 of 153 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Frank from Templeton, CA

Broken vent grill and cracked door panel

Vent Grill - Remove 2 screws on top to the far left and far right and pull out the grill. When installing the new grill, insert the bottom 2 tabs in their slots and then firmly but gently push down on the top of the grill to snap it in place, being very careful not to break the plastic tabs on top. Reinsert the top screws.

Door Panel - Remove 3 screws on the outside edge of the door where the latch is. Snap off the door panel by pulling away the outer edges, being very careful that the glass pane which is only glued to the door panel does not come loose and fall out. Unscrew and remove the door handle. Remove the glass pane by scraping off the silicon glue. A razor is handy for removing any residue. Reattach the glass pane to the new door panel, making sure that the Whirlpool logo is facing the right way. You may need to slightly flex the plastic mounting tabs that hold the glass pane. Apply silicon glue to secure it in place. After the glue dries, screw on the door handle and snap the door panel on the door by gently flexing the outer edges and pushing it in place. Reinsert the 3 screws on the outside edge of the door.

General Comments - Both of these parts have flimsy plastic tabs to hold things in place and unfortunately, because they fit rather snugly, you need to apply just enough force to snap them in place without breaking them. Also, do not tighten any of the screws too much as this can break the plastic or cause stress fractures later. It's an easy installation but you just need to be careful not to break anything.

Help other customers find the most helpful instructions.

Were these instructions helpful?

70 of 132 people found this instruction helpful

Parts Used:
  • Vent Grille
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Edward from Lehighton, PA

Air vent grill was broke (cracked in several places)

Took apart old grill taking out 2 screws then put new grill in place and reinstalled screws and done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

66 of 127 people found this instruction helpful

Parts Used:
  • Vent Grille
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Barbara from Carmel, IN

Broken microwave vent

The old vent slipped right off because the tabs holding the screws were broken. It took just a few minutes to screw in the new vent. Also, I want to add that I only ordered the part on Friday and it arrived Saturday morning. I wish all repairs were this simple!

Help other customers find the most helpful instructions.

Were these instructions helpful?

63 of 125 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Pete from Saint Joseph, IL

Grill on microwave was not staying in place

Took off old grill and replaced with the new grill. This is very easy. I am pleased with the service from your company. Parts arrived very quickly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used:
  • Vent Grille
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: MICHELE from ROSEVILLE, CA

Needed to replace the front vent cover

I didn't have to remove the old cover since it cracked and fell off the microwave already. I simply snapped in the new vent cover, screwed in the 2 screws and I was done. Super easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?