| |
19 of 22 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerVIVIANA from DORAL FL
The door handle was broken
First i remove the 2 screws that hold the door handle and take out the broken piece, put the new one and then put the screws on their place. It couldn't be EASIER!!!!!
Also I want to tell you that Im form Costa Rica and the best thing is that I order this on Sunday at 3pm and I receive this part on Thursday, FASTEST SHIPPING EVER!!!
THANKS FOR EVERYTHING, I HOPE THAT WE CAN DO MORE BUSINESS AGAIN!!! HIGHLY RECOMMENDED!!!
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerNancy from Fort Wayne IN
Daughter broke handle off washer door.
Ordered part. (best price I could find). Part arrived within a week. Unscrewed (2) screws, took off old handle, put on new handle w/ (2) screws. Couldn't be easier.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerPatrick from Platte City MO
Replaced handle on frontload
Removed 2 torx head screws and replaced handle
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerGlenn from Mobile AL
Hard to open the door
First I removed the two screws that hold the handle in place. Replaced the handle.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers
CustomerDana from Concord NC
Drain motor
Exact fit VERY GOOD Quality would order any part
again
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerTheodore from Middletown NJ
Broken handle
Simple. Found my torx bits, removed the screws, removed the old handle, placed the new handle in position, replaced screws.
This happened because I failed to wait for the click on the machine before I opened the door. It's a front loader and it needs time to drain the water before you open the door.
|
1 of 18 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerSammi from Cumming GA
Part of door latch broke along with door handle.
We had never attempted anything like this. But on Youtube we located a video of the repair. The video convinced us that the repair would be both easy and fast. On Partselect the process of locating and ordering the appropriate parts was amazing easy. Approximately 10 minutes after the parts arrived the repairs were finished, and we're still crowing over our achievement.
|