| |
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDustin from Mount Dora FL
The door handle had cracked and broken off
First I removed the two screws that held the old handle and then replaced the new handle with the same screws.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerCINDY from PASADENA TX
Handle broke off
I REMOVED TWO SCREWS AND REMOVED BROKEN PIECE AND REPLACED THE HANDLE WITH THE SAME TWO SCREWS.
THE COLOR AND MATCH OF THE HANDLE WAS PERFECT.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLisa from Dothan AL
Dryer door handle had broken off
I removed the screws holding the fragment of the door, removed the door fragment then placed the screws in my new replacement door (that got here in record time - THANKS!), put it in place, fastened the 2 screws and the problem was solved!!! I am NOT a diyer so this was great for me!!!
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCHERYL from CASCADE ID
Door handle cracked from top bolt almost all the way through
I unscrewed thebolts from the old handle using a small flat screwdriver and removed the cracked handle. I then tossed away all the old duct tape holding the old handle together. Replaced new handle using same old bolts.Strongly cautioned children and husband to not wrench the washer handle open and closed. Tah Dah! Done.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPaul from Lexington KY
The door handle cracked
First I waited 6 days after i was E-mailed the part was shipped until it was shipped, then waited two more days to get the part!
Then i removed two TORX screws removed old handle then installed the new one in reverse order.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMorgan from Marysville WA
Broken door handle
Took two screws out, removed broken handle, replaced with new handle and put two screws back in. Ridiculously easy. :)
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
Customerlinval from raleigh NC
Broken door handle
removing the old srews was a little difficult but once it was done it was much easier to replace the new product.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJames from Davie FL
Old handle craked in two.
After an effortless process with PartSelect with locating, purchasing and receiving the replacement handle in three days, I removed the broken handle by removing two star type screws and removed the broken handle. I placed the new handle in the appropriate location and reinserted the two screws, tightening same. DONE. I will not hesitate to use PartSelect again in the future as the service provided is as great as thier webpage indicates they are. A wonderful shopping experience from beginning to end.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSam from Chicago IL
Broken door handle
First I removed the two screws that hold the door handle in place. I then pulled the door handle off and replaced it with the new one. As long as partselect.com is around I'll be able to keep my appliances longer.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSteven from Hopewell Junction NY
Door habdle broken
Removed screws from broken door handle, placed new handle, replaced screws. Couldn't be easier
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSue from Hanover PA
Broken door handle
I removed both screws form the broken handle.
I then removed the rubber strip and replaced it on the new handle. I put the 2 screws back in and I was finished.
I did it all myself without the help of my husband.
|
2 of 6 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerRoberta from Jasper AL
I had a leaking around the door.
I took off the front lower panel and the top panel. I also removed the door. I used the screwdriver to remove the first spring and then loosed the screw on the second ring that holds the bellow in place.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKEN from HARTLY DE
The handle on my hfw keep breaking
just put the new one on ,simple!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRichard from Clifton Park NY
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTim from Spring Valley CA
Broken door handle
Removed the broken handle and replaced it with the new handle
|