http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/EJVNLADB.gif
See part 23 in the diagram

Door Hinge

PartSelect Number PS391614

This part is used with front load washers.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Lid or door won’t close.
  • Lid or door will not open.
  • Leaking.
  • Compare At

    $99.08
  • You Save

    $16.51
  • Your Price

    $82.57
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 3 reviews What's this?
1-3 of 3
 

12 of 18 people found this instruction helpful

Parts Used

  • Door Hinge

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerMartin from Manning IA

Replaced corroded door hinge

Pretty easy part replacing job. All screws were torx. Pry off plastic molding from front of machine where it covers the hinge with an old thin table knife or something, loosen the plastic molding inside the door, and replace the hinge. Minor hint... put the little round plastic molding back on the round part of the hinge BEFORE you screw the hinge onto the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 13 people found this instruction helpful

Parts Used

  • Door Hinge

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench(Adjustable)

CustomerSylvia from El Paso TX

Door hinge had rusted out and was not closing properly

We had to bread the hinge that had rusted out. That was the worst part. Putting the new hinge was no big deal. The time factor was also great. I called on Monday and had the part by Thursay. With a family of 6 a washer is a huge necessity.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 11 people found this instruction helpful

Parts Used

  • Door Hinge

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGary from Peyton CO

Oem hinge was rusting to the point that it broke on one side

The repair was rather easy. It involved the removal of all the bolts around the glass door and only the bolts on the hinge conected to the washer itself. there was a bit of alignment problem when put back together, minor rubbing, but not much. The door now works close to as good as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3