390101-1-S-Whirlpool-8169738           -Door Handle
390101-1-S-Whirlpool-8169738           -Door Handle 390101-2-S-Whirlpool-8169738           -Door Handle

Door Handle

PartSelect Number PS390101

Handle only. Screws must be ordered separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door not closing properly.
  • Compare At

    $49.09
  • You Save

    $8.18
  • Your Price

    $40.91
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle

Part Number 390102

This bisque handle is not sold with the screws.

$49.35
In Stock

Door Handle

Part Number 556624

This is the handle ONLY. The screws are sold separately.

$37.43
In Stock

SCREW

Part Number 373769

Sold individually.

$2.70
In Stock

Door Handle

Part Number 390100

This white handle is not sold with the screws.

$53.56
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews What's this?
1-3 of 3
 

72 of 143 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerEric from Norfolk MA

Door was cracked, and handle was coming off

I removed the plastic exterior of the door. The plastic exterior has to be pried off. The handle is fastened to the new exterior plastic face, and this is snapped on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

35 of 54 people found this instruction helpful

Parts Used

  • Door Handle

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customersal from Brooklyn NY

Door handle on microwave replacement

I opened the door to the microwave, I removed any screw visible with a screwdriver that's behind the door itself. Next you need to get inside of the door frame, so you need to slip something thin, like a metal putty knife in between and slowly pry it open, it comes out real easy. Now the screws that hold the handle are visible and easily reached. When your finished replacing the handle, carefully squeeze with your hands the two pieces together again and put back the screws. Thats it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 22 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJames from Cloverdale CA

Cracked front panel and door handle

Used flathead screwdriver around the interior edges of the front panel to pry off the front panel. The handle comes with it and along with a glass panel inside. Pry off that glass panel and transer it to the new front panel and pop it back in. I removed the two screws from the cracked handle and used them to install the handle to the new front panel. But, before this I added a couple of plastic washers to hopefully distribute the load better against the front panel and maybe prolong the life of the repair. I cleaned the interior glass, since that's hopefully the last we'll ever see of it. Take the whole assy and just snap it back in place on the door. This $100 in parts probably saved me $600-700 for a new microwave / over-oven install charge.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3