388689-1-S-Whirlpool-8053807-Door-Hinge-Left-or-Right-side.jpg 388689-2-S-Whirlpool-8053807-Door-Hinge-Left-or-Right-side.jpg 388689-3-S-Whirlpool-8053807-Door-Hinge-Left-or-Right-side.jpg

Door Hinge - Left or Right side

PartSelect Number PS388689

Use for painted door only.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t close.
  • Compare At

  • You Save

  • Your Price

In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability


Part Number 393605

In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 2 reviews What's this?
1-2 of 2

4 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerEarle from Taylorsville UT

Both hinges were bent, probably from dropping the door, or leaning on it when it was in the down position.

1st; I opened the door, 2nd; removed the keepers that prevent the door from coming unhinged. 3rd; placed 2 short screws in the holes in the hinges. 4th; raised the door until it stopped. 5th; lifted the door upward and slid the hinges out of the slots in the range. 6th; laid the door face up on a microwave stand. With a handle on the outside, and hinges sticking out of the inside, it was inpossible to lay the door flat on a larger surface, and get around it. 7th; removed 2 screws from the inside top, and the 8 screws from the very bottom. 8th; removed the bottom rail, and the handle assembly. From there everything was stacked pieces. Picked the glass front up, and carefully set it safely aside. Picked each piece up and cleaned it, and started the re-assembly. The hardest part of the process was getting the fiberglass rope around the inside glass, to stay in place during the initial re-assembly. From there, the assembly was just the reverse order. the process was about 1 hour and 20 minutes, due to lack instructions and practice, plus cleaning, finding screws, and tools, Instructions may have been on line, but I didn't find them. The new hinges came with pins in place, and should have come with an extra set to lock the old hinges.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 17 people found this instruction helpful

Parts Used

  • Door Hinge - Left or Right side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJeff from Palm Beach Gardens FL

Oven door sagged & wouldn't close properly

Took off oven door removed all screws to get old hinges out. Replaced with new hinges and put the door back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2