387058-1-M-Whirlpool-786324-Flat-Style-Oven-Igniter.jpg
387058-1-S-Whirlpool-786324-Flat-Style-Oven-Igniter.jpg 387058-2-S-Whirlpool-786324-Flat-Style-Oven-Igniter.jpg 387058-3-S-Whirlpool-786324-Flat-Style-Oven-Igniter.jpg

Flat Style Oven Igniter

PartSelect Number PS387058

You must reuse the original bracket. Be very careful to not touch the black element part of this igniter as it is very fragile.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Gas igniter glows but will not light.
  • Will not start.
  • Little or no heat when baking.
  • Little or no heat when broiling.
  • Compare At

    $65.17
  • You Save

    $10.86
  • Your Price

    $54.31
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.7 / 5.0, 33 reviews What's this?
31-33 of 33
 

0 of 2 people found this instruction helpful

Parts Used

  • Flat Style Oven Igniter

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRonald from Dedham MA

Oven would not ignite

First I turned off the gas supply to the oven and disconnected it. I then pull the oven out away from the wall. I then unplugged the power cord. I removed the oven door by lifting it off of it spring hinges. I then removed a lower plate that covers the burner element by pressing in a manner that it popped off. I then located the ignitor and removed 3 screws. All were easily removed. Carefully, I pulled the igniter out and removed the wires from the wires that supplied the current to the ignitor. Installation followed by working the steps above in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Flat Style Oven Igniter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKathy from Arlington WA

The oven would not light

unscrewed the bracket holding the igniter in place then we pulled the drawer on the bottom out and disconnected the Igniter - then we took the unit out of the bracket replaced it and then put the bracket back into place screwed it in and reconnected the igniter and now it burns hotter then it has since we moved into the house two years ago.
I was worried that it would be a hard long job but was pleasantly surprised when it only took a few minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 12 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customersteve from penngrove CA

Switches knobs and igniter replaced

Very easy, I just hope appliance has more life in it to justify repairing it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-33 of 33