386433-1-S-Whirlpool-759296            -Single Outlet Water Valve Kit
386433-1-S-Whirlpool-759296            -Single Outlet Water Valve Kit 386433-2-S-Whirlpool-759296            -Single Outlet Water Valve Kit 386433-3-S-Whirlpool-759296            -Single Outlet Water Valve Kit

Single Outlet Water Valve Kit

PartSelect Number PS386433

This single outlet water valve is intended for use with some commercial ice machines, and not refrigerator icemakers. It comes with a mounting bracket, two screws, and a washer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $47.72
  • You Save

    $7.95
  • Your Price

    $39.77
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

17 of 19 people found this instruction helpful

Parts Used

  • Single Outlet Water Valve Kit

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerChris from Flower Mound TX

Quit making ice

This is a stand alone ice maker that uses a standard water valve. When the valve fails (usually stuck open) the water never chills enough to freeze because water is constantly flowing into the hopper. The valve is in the very front. Remove the front panel. Turn of the water supply and disconnect the valve. Replace the valve and turn on the water. Let the machine run through 1 cycle before the new valve will dispense water. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Single Outlet Water Valve Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerRobert from Greeley CO

No water getting into water tub.

Replaced the water valve kit as I can tell water is getting to the valvebut it was not getting past it. Still not working after replacing the valve and it may be the electrical to the valve selenoid that is the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Socket set

CustomerEdward from The Woodlands TX

Pump and water solenoid not working-replacedl

Reached in from from of machine to repace the pump amd took bottom front panel off to change the solenoid. Had ordered the pump some time ago because it was noisy. This icemaker was purchased in 1978 and I have maintained it over time with ordered parts. It stll works great and is valued by the family for the beautiful ice free of refrigerator odors.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3