TIMER

PartSelect Number PS384089

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

1 of 1 people found this instruction helpful

Parts Used

  • TIMER

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerGary from Colleyville TX

The timer became intermittent and needed replacement.

I removed the back cover of the control console (after unplugging the dryer of course), used a vacuum to clean several years of dust and lint, and sized up the job. Since nearly a dozen wires connected to the timer, I made detailed notes and a drawing to insure that each wire was reconnected in its proper location. Some of the wire connectors were quite difficult to reach and remove with my fingers, so I carefully used some needle-nose pliers to remove them. The timer was easily removed with a nutdriver. Replacement was a snap, especially since I had a great diagram for reconnecting the wires!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • TIMER

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Royal oak MI

Dryer would not start

loosened the control pannel-took the back off,held the new timer next to the existing one and switched the 8 to 10 wires one at a time from the old to the new unit,installed it ,put the knob back on and I was good to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2