384006-1-S-Whirlpool-694674            -Cycling Thermostat - Limit: 135/155
384006-1-S-Whirlpool-694674            -Cycling Thermostat - Limit: 135/155 384006-2-S-Whirlpool-694674            -Cycling Thermostat - Limit: 135/155 384006-3-S-Whirlpool-694674            -Cycling Thermostat - Limit: 135/155 http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/55904.gif

Cycling Thermostat - Limit: 135/155

PartSelect Number PS384006

Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 degrees Fahrenheit. The differential of this thermostat is 20 degrees, meaning that with this thermostat, the heating element will cycle back on once the internal temperature drops by 20 degrees.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Too hot.
  • Takes too long to dry.
  • Will Not Start.
  • Shuts off too soon.
  • Compare At

    $49.99
  • You Save

    $8.33
  • Your Price

    $41.66
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 13 reviews What's this?
1-5 of 13
 

30 of 39 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerRaymond from Marlton, NJ

Dryer not staying hot. Heat shuts off and doesn't come back on.

Detach front door and pop off front panel. Replaced heating unit on right and all parts on unit. Replaced cycling timer and thermostor on left. The thermostat was the last item replaced. We did this on three stages. First we replaced heating element, still had problem. Then we replaced the high limit and cycling thermostats, still had problem. Had a repairman out. He could not figure it out, because there were no error codes. He suggested replacing the thermostor. We did that and it fixed our problem. We could have saved alot if we did that first, but no one mentioned that part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 21 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerDavid from Plymouth, MA

Maytag dryer-no heat or heat at start-10 mins no heat

replaced high limit thermostat-303396 and cycling thermostat-306056 approx $48.00. Remove dryer door with 2 screws in hinges and 2 screws on other side.Remove front panel-pull out from top-swing down to unhinge from bottom hooks to expose parts lower front. Small socket for high limit thermostat bolts@heating element housing and same socket for cycling thermostat@blower
exhaust air housing-both easily accessible in front lower area.Unplug power before working inside.

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 17 people found this instruction helpful

Parts Used

  • Cycling Thermostat - Limit: 135/155

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerRobert from Buffalo, NY

Temperature setting not working

Took off back cover, thermostat was easily identified because of photos I've seen on website. Took 2 connectors off, removed 2 screws and removed old thermostat. That was pretty much it!

NOTE: Replacement thermostat 694674 has an adjustable temperature range setting that MUST be manually set prior to installing! You need to use the enclosed chart to find your original part# and make sure the setting is matched. My original part# 341146 had a "D" setting so I had to change but very easy to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 18 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Socket set

CustomerAnthony from Staten Island, NY

Flame turning off too early

Used the computer to display error 02. Found Temp control shorted. Needed to replace Thermistor temp control. Thermostat, Cycling I purchased for spare part. All is well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 13 people found this instruction helpful

Parts Used

  • Cycling Thermostat - Limit: 135/155

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsWrench (Adjustable)

CustomerNoah from Maiden, NC

No heat in dryer

Took off the lower front panel, removed duct piece from filter to blower fan, removed two screws and two wires to thermostat in exhaust ducting, then replaced thermostat with new one. Very easy job and everything worked like new when I reassembled it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 13