BBB A-Plus
383733-1-M-Whirlpool-691581-Dryer-Door-Switch-Actuator-Spring-Lever.jpg
383733-1-S-Whirlpool-691581-Dryer-Door-Switch-Actuator-Spring-Lever.jpg 383733-2-S-Whirlpool-691581-Dryer-Door-Switch-Actuator-Spring-Lever.jpg 383733-3-S-Whirlpool-691581-Dryer-Door-Switch-Actuator-Spring-Lever.jpg

Dryer Door Switch Actuator Spring/Lever

PartSelect Number PS383733

This black actuator spring with white rubber tip is used for both dryer doors and washer lids.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start
  • Will not shut off
In Stock

  • Compare At

    $4.99

  • You Save

    $.83

  • Your Price

    $4.16
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 NEXT > 31-32 of 32

 

0 of 2 people found this instruction helpful

Parts Used

    • Dryer Door Switch Actuator Spring/Lever

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKevin from North Aurora IL

The dryer would not run.

I first noticed that the tab of the door switch snapped off so the safety on/off switch did not work when the door was closed. I temporarily taped the switch closed so I could use the dryer. I found the model number from the unit and easily found the schematic and part description from the website. I placed the order and had the part in a few days. Problem solved. Thank you

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Dryer Door Switch Actuator Spring/Lever

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerEdwin from Shelby NC

Dryer would not start

Took top of d then dryer loose then replaced switch actuator put dryer top back in place. Not that hard.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 NEXT > 31-32 of 32