Quick Question!

Have you ever purchased from PartSelect.com before?

382834-1-S-Whirlpool-675828            -Water Inlet Assembly
382834-1-S-Whirlpool-675828            -Water Inlet Assembly 382834-2-S-Whirlpool-675828            -Water Inlet Assembly 382834-3-S-Whirlpool-675828            -Water Inlet Assembly http://www.partselect.com/Schematics/Whirlpool/E5NUK3YU.gif

Water Inlet Assembly

PartSelect Number PS382834

*Revision: Part is now corrected to stop moisture from escaping

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 4 reviews What's this?
1-4 of 4
 

6 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: David from Deridder, LA

Water leaking out side where water enters

AIR INLET GASKET Had to pull dishwaher out, using instructions sent with part, turn it 1/4 turn counter clockwise, tap with screwdriver and hammer and it came right off. Put the new one on. It was kinda hard to get it to turn the last little bit, I had to use a screw driver and hammer to make it twist that last little bit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers
Customer: John from Yakima, WA

Dishwasher was leaking

Removed the old parts, Cleaned the area around the gasket and put in the new. Worked great the first time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used:
  • Water Inlet Assembly
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Russell from Boise, ID

Water was leaking from the water inlet assembly prior to the repair.

Simply followed the instructions that were provided with the part.
Locking the inside vented piece to the outside assembly was difficult because it is located deep along the side of the dishwater (leverage) and I was not sure how much pressure to apply to the part for fear of breaking it. But it did snap into place after several attempts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: AL from WEARE, NH

Water leaking at inlet

piece of cake to do, follow instructions on sheet provided easy as 1,2,3...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4