382106-1-S-Whirlpool-660533            -Surface Burner - 8" - 2600W
382106-1-S-Whirlpool-660533            -Surface Burner - 8" - 2600W 382106-2-S-Whirlpool-660533            -Surface Burner - 8" - 2600W 382106-3-S-Whirlpool-660533            -Surface Burner - 8" - 2600W http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/8138.gif

Surface Burner - 8" - 2600W

PartSelect Number PS382106

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $23.83
  • You Save

    $3.97
  • Your Price

    $19.86
In Stock
Order within the next 8 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Burner Receptacle

Part Number 11728056

Order within the next 8 hrs and your part ships today!
$8.16
In Stock

Standard Y-Frame Surface Burner - 6" - 1500W

Part Number 382104

The manufacturer suggests replacing the receptacle at the same time.

Order within the next 8 hrs and your part ships today!
$19.54
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 31 reviews What's this?
 

2 of 3 people found this instruction helpful

Parts Used

  • Surface Burner - 8" - 2600W

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerjames from killingworth, CT

Burners weren't heating

Unplugged old burner elements. Popped in new burners. Turned on the burners to test.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerFRANCES M. from GRAND JUNCTION., CO

Broken burner

Unwrapped package. That was the hardest part. Inserted into the little spot on top of stove. Tested. Worked great!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerROBERT from ARVADA, CO

Intermittant operation of surface burner

I first tripped the power circuit breaker. Then I unplugged and removed the old element. Removing one screw allowed me to remove and replace the mounting clip. This did result in breaking off a small piece of plastic-like material from the electrical housing to which the clip was attached but did not hinder the replacement of the new clip. I inserted the new burner element. The surface burner is now working fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerMARY from ABBEVILLE, LA

I used a pot that was too heavy and it broke my burner

plugged element into the plugin

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJohn from Norfolk, MA

Burners didn't work

Shut off power to the stove.
I removed the screw that held the block in place. Then I lifted the top of the rage to get to the wires. I cut the wires from the old block and stripped back the insulation. Next I put the heat shrinking sleeve on. I attached the new block with the wire nuts, pulled the sleeve down and used a hair dryer to shrink them. Then you just hook it back on screw it in and your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?