374011-1-S-Whirlpool-4396265           -Exterior Door Panel - Stainless Steel
374011-1-S-Whirlpool-4396265           -Exterior Door Panel - Stainless Steel 374011-2-S-Whirlpool-4396265           -Exterior Door Panel - Stainless Steel

Exterior Door Panel - Stainless Steel

PartSelect Number PS374011

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $191.63
  • You Save

    $31.94
  • Your Price

    $159.69
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 3 reviews What's this?
1-3 of 3
 

2 of 4 people found this instruction helpful

Parts Used

  • Exterior Door Panel - Stainless Steel

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJim from Wadena MN

Swithed out the black door front to stainless steal

Used a tork driver and removed all the screws. Took old pannel off and put new pannel on. Took about 10 min. to complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerOtto from Flower Mound TX

Converted the front of dishwasher to stainless steel

I replaced the 2 parts of our 3 year old dishwasher to match our new stainless steel appliances. I had to remove and install 2 new parts took about 1 hour and was easy and figured it saved us about $200 over buying new dishwasher. The only slight challenge was to transfer the elelctronic circut board. The instructs included with the new parts were very helpful.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

Tools

CustomerDaniel from Germantown MD

Merely switching from bisque to stainless steel

Removed the toe panel and replaced.
Removed the front panel and replaced.
Removed the control panel, disconnected the ribbon wiring and replaced with the new control panel. Reconnected the ribbon wiring and secured the panel with the six screws..

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3