373014-1-M-Whirlpool-4391960-Heating-Element.jpg
373014-1-S-Whirlpool-4391960-Heating-Element.jpg 373014-2-S-Whirlpool-4391960-Heating-Element.jpg 373014-3-S-Whirlpool-4391960-Heating-Element.jpg

Heating Element

PartSelect Number PS373014

This element carries 5200W and 240V. Note: This element no longer includes two terminals and two adapter leads. They must be ordered separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Takes too long to dry.
  • Compare At

    $50.08
  • You Save

    $8.35
  • Your Price

    $41.73
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Heating Element Connection Wire Kit

Part Number 334206

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

$5.59
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 56 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers, Socket set

Customerdavid from chesterfield MO

Not heating the air

Looked at the videos, opened top and took off back pulled thermal fuse and heating element. Element coil was broke, Matched part numbers and ordered parts 3 to 5 days shipping. Recieved the next day and put back together and it works fine. Wife happy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

Customerjohn from littleton CO

Stopped heating

Replaced heating element,thermal fuse,cycling thermostat,thermal cut off kit and don't forget to flip your dryer fuse in the breaker panel that was a big one for me. Hope this helps you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyVery Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerMatthew from La Mesa CA

Heating element burned out

installed new element within 15min... no need to pay the man .. will DIY again using this parts service...

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerMichael from Keller TX

Dryer would not heat up

After reading a few online suggestions I didn't take any chances with the repair. I had looked at the heating element enclousure and found the thermostats and thermal fuse. I found the parts I needed on PartSelect and ordered all three. The thermostats were easy to replace as they were located in plain view. Removing the old heating element was a little more difficult but once I found the screw at the top of the enclouse (there is a hole in the back of the dryer cabinet above the back cover) I was able to use a nut drive (with extension) to remove the hex head screw and the enclosure came right out. One screw holds the heating element in the enclosure. The old heating element looked like it was rusted through - I'm sure the high heat over the 18 years we've had the dryer caused the oxidation. The whole thing took right at 30 minutes and was basically just removing the old parts and plugging the wires back on to the new parts and replacing the scrwes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerMelinda from Bainbridge IN

No heat

Followed instructions, installed part, apparent after turning on dryer and still no heat we didnt fix the problem yet, will try another different part at a later time. At least we know we will have a fresh heating element.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerPaul from Warner Robins GA

Would not dry the clothes no hot air

I first disconnected the power, dryer vent hose, back panel, disconnected power leads to heater element. Next removed top screw to the heater box, slid the box up and away from lower mount. At this point I was able to remove 1 ea lower screw holding heater element in place. Removed heater element and installed new element. Put everything back in reverse order and started dryer. (Note: Be sure dryer door is closed prior to starting dryer)Yep, I screwed that up. It no "worky" when dryer door is open. Once the door was shut, it worked like a champ.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerMichelle from Herington KS

Install a new heating element

First of all the instructions with the part were not very plain to understand so I returned to the web site and read some of the other custormers instructions and was able to figure out how to replace the part. Just had to unscrew the back panel and remove the screws from the heating element housing and then I took the screws out of the lint compartment so I could remove the whole housing to remove the screw that held the heating element to the housing and was easy to cut the eletric wire and conect the new wires and twist the new wire cap on and put everything back together. I was so glad that when I turned the dryer back on I had heat. I am 57 year old women and If I can figure of how to fix my ole dryer than I think anyone can. When I can I will order the part for a new timer. And I hope that my dryer will last another 10 years.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Socket set

CustomerRobert from Jacksonville FL

Dryer was not heating

Unplugged dryer. Removed back panel from dryer. Using needlenose pliers, disconnected wires going into heating element housing cover. They basically just unplug. You have to wiggle them a little with the pliers to get them unplugged. The housing cover is the large metal piece on the right side of the dryer. Kind of looks like a catalytic converter from a car. Popped off housing cover by putting a large screw driver behind it and gently prying forward. The top came loose from the dryer and I then lifted it up off the two tabs holding it at the bottom. I then unscrewed the one screw holding the element to the bottom of housing cover. I slid the element out, inserted the new element, put the screw back in place and then put the housing unit back in place over the two tabs. I replugged all of the wires into the housing unit, replaced the back cover on the dryer and plugged the dryer into the wall receptacle. I turned the dryer on and it heated up right away. I have since dried several loads and it is working perfectly. By the way, I am a 65 year old housewife. If I can do it, anyone can.
Mary McCarthy
Jacksonville, FL

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Socket set

CustomerAllison from Edison NJ

Dryer wouldn't heat

According to previously submitted instructions. toughest task was replacing the tiny screw at the bottom of the heating element housing. Felt good to plug it in, start it up and voila, heat. thank you for the part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerMary from Kettering OH

Dryer not hot enough to dry a load of clothes

My son did the repair and thought it went very well. You saved me about $400 to $800 in that I didn't have to buy a new one. You got this part to me in 48 hours and I appreciated your timely manner. Your service is great! Thanks MZ

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Wrench(Adjustable)

CustomerKEN from OXFORD JUNCTION IA

Heating element bad

FAIRLY STRAIGHT FORWARD EXCEPT FOR HIDDEN 5/16 SELF TAP SCREW COMING FROM BACK SIDE OF HEAT DUCTING THAT IS WELDED TO DRIER. YOU HAVE TO REMOVE THIS BY FEEL AND RESTART BY FEEL WHICH MAY BE DIFFICULT FOR SOME. THIS SCREW HOLDS THE ELEMENT TO THE HEAT DUCT. IT HAS TO COME OUT

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerMichael from ROSELAND NJ

Dryer stopped heating

Took off the back panel, and with a little prying got the heating element case off (it's on the right of my LE5800XK). Replaced the heating element, put everything back, and voila, works better than before.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set, Wrench set

Customerboyd from middletown CA

The dryer turned but there was no heat.

First I took off the back protection plate and vacuumned all the lent away. I looked to see where the heating element was but honestly wasn't sure. So I went to the website and looked at the schematic diagram. Ah ha! It was 15 inches long and was in a riveted casing.
So I ordered the element and fuse, not knowing what was broken.
When I got the element I was surprised to see that there was only room for one screw. Great! I reached up in the casing and with a wrench took my time and unscrewed it. Looking around I noticed the only way I was going to get that thing out of there was to sort of bend it as I pulled it. Sure enough it slid out and when I looked at it the element was broken in one spot. To get it back in I reversed the procedure and pushed while I bent the frame gently. Then I replaced the fuse, put the plate back on and cranked it up. I was my wife's hero for a couple of days.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Socket set

CustomerGeorge from Bradenton FL

Dryer stopped heating

Remove screws at lint filter, open top of dryer. Remove hex screw holding top of element casing. Slide dryer away from wall, remove 5 hex heads from rear panel, exposing element casing. Remove two screws holding sensors, and move aside. Lift dryer casing slightly and pull towards you to disengage from rear panel. Turn over and remove srew holding element to casing at bottom. Slide element out, and unplug two wires, noting position of each wire. Reverse procedure to reinstall element. Dryer works better than it has for years !

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Heating Element

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerLee from Mableton GA

Dryer stopped heating

Super easy!
-unplugged
-removed the 6 screws in the rear
-pulled off the back panel
-unplugged the 2 wires attached to the heater element (note which one connects to where)
-remove dryer filter and the 2 top screws that next to it
- lifted the top up
- there is one screw at the top of the heater element casing that needed to be removed.
- poped the heater casing away from the dryer.
then pulled it out from the bottom
- removed the one screw holding the heater element in the case, and slide it out
-slide the new one in, and put the screww back in
-pushed the heater casing back up in the dryer and connected the 2 element wires.
-slide the heater casing in the 2 slots and pushed it backing to the dryer at teh top.
-screwed the on screw back in at the top of the casing.
- put the dryer top back in place and 2 fliter screws back in.
- reattached the back panel. and plugged back in.
- viola...

Help other customers find the most helpful instructions.

Were these instructions helpful?