Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS372052
This is a 12 piece kit.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I have an old DIY home repair book and I saw that the ice maker repair wasn't hard, so I ordered the parts from Part Select. 1 day to arrive...super service. The site is very helpful with diagrams about the parts. The repair was a cinch...EXCEPT I forgot to unplug and got a little zap. The shelf pegs were a breeze because I had read other's stories about how to remove and replace on this site. Go try to do it...get a book at library if you need some direction.
Help other customers find the most helpful instructions.
Were these instructions helpful?
My freezer compartment was difficult to use efficiently with the two shelves and the bin missing. I was thrilled to find these replacement parts ... now it's back to like new.
I wasn't sure the kit included the part I needed from the pictures, but it did. The part slipped over the flat plastic bracket attached to the right freezer wall and the shelf fit over it. No tools required.
It was fairly easy I had to remove the old parts first. Then install the new ones! It's great to find the replacement parts at a place other that the original manufacture! And at a very good price.
Ordered shelf support stud kit. Product was promptly delivered, and contained the parts as shown on website. Took longer to open the package than to replace the missing shelf support bracket. No problems. Would order from them again.
I removed the crisper drawer cover and took out the glass and put it in the new drawer cover. The freezer support shelf had been missing for a while. All it needed was the shelf suuport that slid down over the stud in the freezer wall. Couldn't be simpler! No tools needed.
I simply slid off the broken supports, and slid the new ones on.
The new shelf support part fit perfectly. I needed no tools just slid it on the existing bracket. Super easy.
Took just a few moments to install. The parts fit like a glove,
Replaced missing stud.
Replaced broken shelf bracket
Took the old shelf and removed the endcaps and snapped the new ones on.The support stud kit could have had better directions. Was unsure if the whole piece came out of the wall of the freezer or not. A little confusing.
Went online with the model number, the part was very easy to find, diagrams helped me to have confidence in the choice. Parts came in two days, tore them open and used a screw driver to replace the broken shelf brackets, replaced shelves, I am a happy camper!!
Pulled out the stud with a wire cutter and replaced it with the exact part you shipped in the kit.The other 2 parts just slipped on the bracketsNice thing is now I have extra parts for the other shelf.
First, I turned off the water supply to the refrigerator. I then used the nutdriver to remove the cardboard covering over the water valves. I removed the two screws and three water lines from the valve with the adjustable wrench and I disconnected the electrical wires from the valves. And then reversed the process and installed the new valve. also, wanted to note that the repair parts came very promptly.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.