Quick Question!

Have you ever purchased from PartSelect.com before?

372051-1-S-Whirlpool-4388539           -Shelf Support Stud
372051-1-S-Whirlpool-4388539           -Shelf Support Stud 372051-2-S-Whirlpool-4388539           -Shelf Support Stud 372051-3-S-Whirlpool-4388539           -Shelf Support Stud http://www.partselect.com/Schematics/Whirlpool/9HF63OFK.gif

Shelf Support Stud

PartSelect Number PS372051

This part includes 2 shelf support studs.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Compare At

$17.52

You Save

$2.92

Your Price

$14.60
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

32 of 37 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Patricia from Hobe Sound, FL

No ice from icemaker and broken shelf pegs

I have an old DIY home repair book and I saw that the ice maker repair wasn't hard, so I ordered the parts from Part Select. 1 day to arrive...super service. The site is very helpful with diagrams about the parts. The repair was a cinch...EXCEPT I forgot to unplug and got a little zap. The shelf pegs were a breeze because I had read other's stories about how to remove and replace on this site. Go try to do it...get a book at library if you need some direction.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 8 people found this instruction helpful

Parts Used:
  • Shelf Support Stud
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: nolan from El paso, TX

Fridge shelf stud broke vegetable shelf un even

left the shelf/vevetable in place. used pliers or adjustable wrench to remove broken peice. a standard adjustable wrench will remove this peice, it has flat surfaces to grab. make a 1/4 turn going upward. use a flat tip screwdriver to remove old part. discard old pard. insert new part into shelf support hole flush or fully into the hole. While applying a slight amount of force to keep part flush against the wall make a 1/4 bownward part is self locking. I think you only get one chance so take it easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Shelf Support Stud
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Wrench (Adjustable)
Customer: RICHARD from PINECREST, FL

Shelf support failed.

Followed instructions that were online when ordering part. Put a adjustable wrench on the square end of the plastic support and twisted upward. Support bracket came off easily. Inserted new part and twisted downward on the square end of the support and it locked in place. Surprised it was so simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3