BBB A-Plus

Overload and Relay Assembly

PartSelect Number PS371468

This kit comes with the compressor relay, overload and cover.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start
  • Freezer section too warm
  • Fridge section too warm
In Stock

  • Compare At

    $59.22

  • You Save

    $9.87

  • Your Price

    $49.35
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-5 of 5

 

16 of 26 people found this instruction helpful

Parts Used

    • Overload and Relay Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerJohn from Sachse TX

Refrigerator not cooling.

Unplugged power cord from the wall outlet
I removed the back cover using a 1/4 nut driver. Removed the two wires, one went to the starter driver the other to the overload protection. Unplugged the part from the compressor.Plugged in new part and re-attached the two wires replaced cover and plugged in power back in to the wall outlet

Help other customers find the most helpful instructions.

Were these instructions helpful?

13 of 24 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerStephen from Holt MI

Smelled electrical burning / smoke

Removed cardboard back from refrig. Found source of smell/burn. Removed part. Ordered several replacement parts as the diagram was not clear as to which part would be needed. New parts arrived, matched with old. Cleaned carbon from contacts, installed new part. Cleaned dust from refrigeration coils, installed back. Returned unused parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 7 people found this instruction helpful

Parts Used

    • Overload and Relay Assembly

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerVictor from Colton CA

Refridgerator do not get cold

Disconnect the power, removed the back panel, plastic cover and the relays. Replaced new parts, reattached the back panel and reconnected the power. The hardest part was to remove the plastic cover, it was locked on so tight,I had to use a putty knife to separate the cover from the compressor.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 6 people found this instruction helpful

Parts Used

    • Overload and Relay Assembly

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver

Customerfrederick from martinsville IN

Evaporator was clogged from no cleaning since new

I heard the compressor running, it was very hot. I looked on the internet for that model and found where the overload was an answer for compressor not running. First order was from a different source and I was sent the wrong overload for this frig. I ordered from Partselect.com and was provided with phone support and was sent correct overload. If I would have received the correct overload first, the time to repair would have been a 1/3 of the time. Thanks Partsselect.com.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 16 people found this instruction helpful

Parts Used

    • Overload and Relay Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerwalter from deland FL

Inconsistant compressor starting

removed old unit and installed new one. very straight forward process. fridge has performed flawlessly since. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-5 of 5