Detergent Dispenser Cover Kit

PartSelect Number PS370872

This kit also includes the lid hinge pin, spring, snap and latch.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not dispense detergent or Jet Dry.
  • Door latch failed.
  • Not cleaning properly.
  • Compare At

    $28.33
  • You Save

    $4.72
  • Your Price

    $23.61
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 7 reviews What's this?
1-7 of 7
 

15 of 33 people found this instruction helpful

Parts Used

  • Detergent Dispenser Cover Kit

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLARA from Murfreesboro TN

The dispenser door would not open due to a broken spring

Removed the existing dispenser door, took off old spring. Slid new springs on pin, got it situated between the correct parts of the door. Popped it back on the pin inserts. Twisted spring into springing action position, voila. It was repaired. No repairmen. No additional costs, fees, nor extra time waiting on repairmen.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 20 people found this instruction helpful

Parts Used

  • Detergent Dispenser Cover Kit

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerPhillip D from Auburn AL

Latch had broken on detergent dispenser cover

Remove retainer that holds door color slide in front of door & then remove the slide. Remove cardboard backing, remove electric latch release, remove latch & replace with new one. Open door & slide out the cup dispenser cover pin & spring & replace with new ones. This was all straight-forward & simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 12 people found this instruction helpful

Parts Used

  • Detergent Dispenser Cover Kit

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Vancouver WA

Door hinge broke

All pieces just snap off and the new one just snap right back in place.

Remeber take a little time to do your repair correctly.

It is cheaper to repair an appliance than it is to replace.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 33 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set, Wrench set

CustomerKathy from Kennedy AL

Dishwasher had no water coming into the bottom of it

Took the old one off and replaced it with the new one we received from you. It was great because we received the part just in time to do the Thanksgiving dishes! Thanks PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 11 people found this instruction helpful

Parts Used

  • Detergent Dispenser Cover Kit

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMichael from Las Vegas NY

Soap door hinge broke

I took the pin and i slide it through the first hole attached the spring then sldie it through the second hole and snap the cover on

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 8 people found this instruction helpful

Parts Used

  • Detergent Dispenser Cover Kit

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerNicole from Newnan GA

The previous rod holding the cup in place broke

Remove completely the old one and installed the new entire kit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 15 people found this instruction helpful

Parts Used

  • Detergent Dispenser Cover Kit

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

Customercraig from Columbia TN

Was just missing the door and spring

You slide the pin that holds the door in the first hole. then you slide the spring in next. The you slide the pin through the last hole. After that you gently push the door onto the pin till it snaps into place. And your done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-7 of 7