Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS370794
This door shelf end cap set contains two white end caps. Each end cap can be used as either the right or the left side. These end caps also come with adhesive strips and an instructions sheet.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part may be too long for your appliance and may need to be cut to fit your specific dimensions.
I forgot to order all the parts i needed, and when I placed a second order for the remaining parts on the same day, PartSelect contacted me and asked if I wanted to consolidate the order and save on shipping. I thought this was very thoughtful. Anyway, the lower door handle was very easy to replace, I just cut the handle to the correct length with a hacksaw, put the new end cap on, and screwed it in. The inside shelf end caps were a snap too. Just remove the old ones and snap the new ones in place. Done!
Help other customers find the most helpful instructions.
Were these instructions helpful?
The part for this refrigerator/freezer is no longer made by Whirlpool so a longer retainer bar was recommended and it was necessary to cut the bar to fit our freezer shelf. It's easy to cut if you have a powered mitre saw but if you don't have one, you would have to ask someone to cut it for you and that could take you some time and additional expense. It might be better to ask a service company to do this for you if you don't have the powered mitre saw.
Remove old parts, install old bar to new caps and snap in place. So easy even a caveman can do it!
The brackets were surprisingly inexpensive, arrived in lightning time, and were so simple to install! A bonus is that the CORRECT parts arrived! I didn't have to send anything back. I just snapped them into the shelf and that was that!
I followed the directions that came with the new part. Thank you for making it so easy. You sent me everything I needed to make the repair.
snapped the new ones on the aluminum bar and inserted into the freezer
Slid the end caps onto the shelf, placed the tape on the pieces as noted in the directions, and put the shelf back in place. Fast service, exact part, easy to find on the web site! Great!
I removed the broken end cap and then I snapped the metal shelf onto both end caps and replaced the shelf. I really must say that dealing with PartSelect was exceptional. It took about three days for me to get the part and, prior to that, it was very easy for this sidewalk fixer to locate the correct part on their website. Thank you for your excellent service.
Took out the broken part and replaced with the new one..Simple enough and we had been living with a taped one for yrs...
removed retaining bar removed and replaced end cap and reinstalled retaining bar.
Just replaced the old piece with the new. Simple and easy.
Removed the existing broken end cap, and replaced it with the new one. Installed shelf securely back in fridge. Easiest repair I've ever done. Less than 5 minutes. I wish everything were that easy.
Well the part and repair was so easy my wife did it and is very proud of herself
I put the end caps on the shelf bar and popped them into the slots on the refrigerator door. Very easy.Good experience ordering from PartSelect. Glad I could make repair with minimal expense.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.