14 of 15 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
CustomerDenise from Burnt Hills NY
Heating element corroded, not heating
Removed bottom plate and heating element brass nuts. Disconnected heating element. Connected new one then replaced brass nuts. Put bottom plate back on. Very easy.
8 of 15 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers, Wrench(Adjustable)
CustomerJane from Port Charlotte FL
Heating element went out
Removed the clamp holding it to the floor and
removed the c-clips holding element underneath
and put new one in. Hard part was figuring out
what was holding the element but since I still
had the schematic drawing we figured it out.
Saved a bunch on a repairman. After watching
my friend install the new element I could probably
do it myself next time.