http://www.partselect.com/Schematics/GE/GE_Thumb/00005070i03.gif
See part 603 in the diagram

HANDLE DOOR

PartSelect Number PS3652831

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Door won’t close.
  • Compare At

    $3.00
  • You Save

    $.50
  • Your Price

    $2.50
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 46 reviews What's this?
1-15 of 46
 

34 of 37 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJim from North Richland Hills TX

The dryer door handle broke off.

I pried out the remaining pieces of the handle out of the door with a screwdriver. When the new part arrived, I snapped it into place and it was done. It fit perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJerry from Mindoro WI

The plastic door handle on the dryer broke and came off.

I received the replacement part I ordered from PartSelect.com within 3 days of placing the order. I opened the plastic bag it came in. I snapped the part into the holes left vacant by aforementioned abscence of broken part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKaren from Warwick NY

Handle broken on dryer

Removed the broken handle from the dryer and popped on the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 8 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerCraig from Castle Rock CO

Dryer squeeked badly when running.

I've always heard it was a simple job to replace the belt and that would solve the problem. I'd defer to others online when they suggest to replace the rear bearing - they are totally right about that suggestion. My bearing basically fell apart in my hands. Not sure if I needed a belt or not, but it's worth replacing while you are tearing the thing apart. It took way longer to tear apart than to put back together. The parts and prices from PartsSelect were perfect. The parts were received in 4 business days as they said and were perfect replacement parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJennie from Louisville GA

Door handle broken

Inserted handle into slots

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCheryl from Old Town FL

Broken door handle

Clips on the inside of the door handle had snapped off, 1 minute later it worked like new. NO TOOLS required! So happy my older appliances can have new life by the parts carried by PartSelect. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAngela from Richmond KY

Broken dryer handle

My husband broke the door handle, but of course, i had to be the one to order the part & fix it. I ordered the part on the weekend and much to my suprise it was on my doorstep on Tuesday when I got home from work. Then I saw the part was shipped from nearby Louisville. I was overly happy with partselect!!!!! All I did was open the packaging and clip the dryer handle into the 4 holes. Easy as pie!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKathleen from Cedar Rapids IA

Replaced burner bowls on stove; door handle on dryer.

I opened the box, removed the items from the plastic, checked the paperwork and the invoices and installed everything within 15 minutes!
Thank you PartSelect!
It was a pleasure doing business with you!
Everything is working properly and looks great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerKevin from East Peoria IL

Dryer made a squeaking noise while running

I removed several torx srews across the back control panel. Removed two philips screws under top of front dryer door. Pulled up on top surface of dryer case. Removed two more screws on backside of front door panel. Pulled front door panel forward and inserted drum slides into slots that they just popped into with a small button rod to keep them in place. The old drum slides were completely worn down or fell off. It runs like a new one again. It is over 10 years old.
The new door handle just snapped into place.
Original door handle had been broken off for several years.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerfrankie from east windsor NJ

Door handle was broken off and I needed a new lintfilter

door handle just snaps right in and the lintfilter is a no brainer. thank you very much partselect keep up the good work

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSteve from West Bloomfield MI

Plastic handle in dryer broke off.

All I neede to do was buy the new part and snap it into place on the door. The hardest part was making the door usable while waiting for a new handle. The solution was good old duct tape. I just taped the old broken handle in place until the new one showed up.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRick from Nora Springs IA

Bottom part of handle was loose

Opened up the package and took off existing door handle. The new one snapped right into place. This took all of 10 seconds!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn C. from Cincinnati OH

The door handle was comming off had broken hook

I pulled the old handle off and pushed the new one on.
No problem at all.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customersyd from wilmington NC

No handle

just replaced the unit handle and how my wife can open the dryer without a screwdriver

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • HANDLE DOOR

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJay from Niceville FL

Plastic tab broke on handle --- temp taped on.

My daughter, who has the dryer in Florida, made the repair herself. She removed the broken handle that had been temporarily taped in place. Cleaned off tape residue with Goo-Gone. Then took the new handle and snapped it into place. Worked just like it was supposed to.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 46