Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
December 18, 2019
I ordered spider shaft assembly. When removing the bolts from the old one. One of the bolts would not come out the nut was spinning inside the plastic on this part. Does this part come with the bolts to hold the spider assembly
For model number WM2688HWMA
Hello Tim and thanks for writing.
No, it does not. Bolt # PS3522806. We hope this helps. Please contact us anytime.
The book says this is a lifter assembly, my book calls it a roller jet. Are these the same thing?
For model number WM2801HWA
Hello Seliene, Thank you for the question. Very sorry but we do not show a part referred to as a Roller Jet. The Lifter Assembly is the Drum Baffle that attaches tot he in side of the drum to help tumble the clothes as the drum spins. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jamie
June 16, 2023
Part number 4432er1008a drum baffle. Cannot find it ,,,it is a 2 part assembly. Not the one you have listed as 4432er1005a
For model number Wm2801hwa
Hi Jamie, thank you for getting in touch. According to our research, the drum baffle, part number PS3639443, is compatible with your model, and it is a manufacturer-recommended replacement part. It is a two-part assembly. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Matthew
November 16, 2021
Washer stopped spinning during wash, not sure what cycle, smoke was rolling out from inside DE code on display and a burning rubber smell. Is this a failed belt or is there more than one and can I fix myself easily, I'm handy finally, do you have part numbers for me? Thank you!
For model number WM2701H
Hello Matthew, Thank you for the question. This model number does not require a Belt to spin the Tub. This could suggest the Stator Assembly or the Rotor Assembly is defective and may need to be replaced. We hope this helps!
