Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Frigidaire/K1ZYTW2Y.gif
See part 34 in the diagram
http://www.partselect.com/Schematics/Frigidaire/K1ZYTW2Y.gif

Door Switch

PartSelect Number PS3633434

The door lock switch, or simply door switch, is used in ranges and ovens. The switch activates signals to the oven control board about the state of the door lock. If the light in the oven is not turning on or off, or the self-cleaning option is not working, it is best to replace the switch to solve your issues. The tools needed for this installation project are a flat-head screwdriver, Phillips-head screwdriver, and pliers. To repair, first remove the screws from upper rear access panel, then open oven door to disconnect the door switch wire connecter. Next, remove switch assembly through the access hole and unhook the old hook from the actuator rod. Now you can install the new switch by hooking it on to the rod and back into place. Refer to the manual provided by the manufacturer for further installation instructions and guidance.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, KENMORE®, Tappan & White-Westinghouse.

Compare At

$24.19

You Save

$4.03

Your Price

$20.16
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

8 of 11 people found this instruction helpful

Parts Used:
  • Door Switch
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Gregory from Croton-on-Hudson, NY

Oven door light switches wrecked by heat from oven

Pull old switches out with pliers and replugged new switches. On main oven, plug casing was melted (wife left broiler on with oven door closed) so had to break apart old casing and individually plug the the wires into new switch and amazingly, it worked! Just gotta keep the door open when broiling.............

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
  • Door Switch
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Anne from Portland, OR

Range would not recognize the door wasn't shut

I was required to remove the control panel to access the plug as it had been broken and the switch had been shoved into the unit . It would have been extremely simple if the plug had remained on the outside surface
My son can now clean his dirty oven

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2