Fan Switch

PartSelect Number PS3632526

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

    $67.76
  • You Save

    $11.29
  • Your Price

    $56.47
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 6 reviews What's this?
1-6 of 6
 

4 of 4 people found this instruction helpful

Parts Used

  • Fan Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRobert from Rhinelander WI

Original fan switch wouldn't shut off.

Once I got the part from Parts Select it was easy. Removed four screws, liftef knobs and face plate. Removed two more screws , lifted assembly(after I shut off power)
Removed towo connectors and nut holding switch. Replaced with new switch and and did a reverse of proceedure to put together.
Real story was before I found Parts Select I contacted JennAir and their person couldn't understand or help me. I emailed the original manufacturer of the part and found it was obsolete. They did not offet a substitute.
10 minutes on line with PS and I had what I needed ordered.
Thank You

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Fan Switch

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCarri from Pittsburgh PA

Fan switch would not work the fan

Unplugged the unit first of course. Removed the control knobs.

Removed 4 screws from the control panel on the side of the stove top.

located the fan switch and took out the two connectors. The only little problem was the little bolt that holds the fan switch in place was slightly the wrong size for the new fan switch. I had to go to the hardware store to find a bolt that would hold the switch in place within the unit.

after that was located it was very simple to plug the connectors in to the new switch and put everything back in place. If a bolt would have been included it would have been a 10 or 15 minute job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Fan Switch

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerperry from germantown TN

Exhaust fan wouldnt shut off

Piece of cake. Unplug power. Unscrew 4 screws on side. Unscrew 2 screws on top. Pull off top cover and plug in new switch. Switch was not the same but it still worked just fine. Very easy and much cheaper than paying Sears of JoeBlow $100.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Fan Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCarolyn from Cressey CA

I knocked the knob off the fan control and the stem of the control broke, too.

First I removed 3 screws that held a plate againt the wires. Then pulled the element out about 3 inches and disconnected the 2 wires holding the old element and connected them to the new element. Replaced the plate with 3 screws and I was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDavid from Fulton MD

Replaced turntable motor

Removed bottom panel by removing 6 screws. Removed 2 screws holding motor and replaced.

Piece of cake! Saved a fortune. Appliance repair service wanted $380.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Fan Switch

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench set

CustomerConrad from Roswell GA

Fan wouldn't turn off

Removed the part that didn't work and replaced it with the new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-6 of 6