Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS358690
This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I followed the video instructions available on the net. Hardest part of the job was getting up off the floor after I disconnected the water line. I'm 90 years old
Help other customers find the most helpful instructions.
Were these instructions helpful?
I watched the how-to video on your website first and it made the job so much easier. Just remove the upper hinge, lift the door off, and replace the cam bushings on the bottom hinge. Put it back together in reverse order and your done! Thanks for having such an informative website! It saved me from buying a new appliance.
Empty the refrigerator door of all items and removable shleves.Reomve top hinge (three screwsa at top of exterior).Lift door off of bottom hinge pin.Lay door across tableRemove top half of cam from door and replace with new cam half.Remove bottom half of cam from bottom door hinge pin.Lubricate both cam surfaces with small amount of silicone lubricant.Replace door on bottom hinge pin and replace top hinge.You may need help guiding teh door back onto the botttom hinge pin.Replace all door shelves. Done!
The parts were delivered promptly. I ordered the kit assembly because I didn't know which part was the problem. Reading the remarks from other people's symptoms and solutions made the process much easier. I replaced both the upper and lower cams. Lubricated the cams and reinstalled the door.. Problem solved!!!!
I removed the door and replaced the door cams and reinstalled the door
I am a single female so the hardest part was lifting the door off and then trying to get it back on the hinge. I used the same bolts that were on the door so putting the new parts on was the easiest part. The slowest part was finding the right socket for the bolts and unscrewing the originals. Beats hiring a repair man.
removed door,removed worn part and replaced with new.
1. Used fine tip marker pen to draw outline of upper hinge position2. unloaded food from door3. took decorative cover off upper hing mount4. loosened 3 screws (not completely) and lifted up upper hinge to permit upper door pin/hinge to come free.5. lifted door off lower hinge.6. remove broken pieces, cleaned, put in new pieces, added small amount of grease7. put door on bottom hinge.8. put top hinge into door9. snugged up three screws in top hinge plate.10. had to loosen top hinge screws and tap hinge plate around to get door to close by itself when about 1-2 inches from being closedBest part was PartSelect save me bunches of money and got parts quickly
I removed the door (three screws on top). Flipped the door upside down, removed the cams, and replaced with the new ones and replaced the door. Now the door closes great. The only problem is that the door sort of "clunks" into place when I open or close it. I am not sure that I used the right cams. The drawing on the directions was not at all clear.
rem upper hinge on door on & lifted door off. installed kit provided & ressemble.
Replaced the refrigerator and removed doors to put the old unit in the basement as an overflow fridge. Noticed the cams broken/worn/missing on bottom door hinges. Ordered parts. When parts arrived, installed them and fridge back in operation. Parts kit had screws with slightly different sized heads, and if you used the wrong ones to mount the cams, there would be a clearance problem. There were no instructions with the parts to explain this. There also were a couple of plastic parts in the kit that were not used - no explanation given.
Very easy to remove door replace door cams reassemble shuts tight now and works like new
Taking the door off was easy with a nut driver. The new parts were a little different than the original. The new part required a hole for the screw to secure the cam from turning, and my refrigerator did not have any holes, so I had to drill holes to adapt the new part. otherwise it would have been very easy. I didn;t install the shelf support stud yet, as I am trying to find out how to get the old broken one off.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.