Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS358591
***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. Its harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
When the shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.
When the icemaker shut off arm is high enough the ice maker will shut off and no more ice will be made until the level of the ice in the bin drops. Also the ice maker can be turned off by lifting the arm all the way to the top until in a locked position.
The ice maker wasn't working. I diagnosed the motor as being overworked and burnt out. It stopped working a few months ago and I never got around to changing it. But my father who came to visit decided to take it apart. In doing so, he misplaced one of the three screws. Otherwise the ice maker went in very quickly. I spent the rest of the time looking for the screw and eventually gave up and searched through Lowe's for a match. Needless to say I found the original screw when I was putting all my tool box away.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Three screws, one plug and turn the water back on and you're done. This is an easy fix.
Removed three screws as illustrated in the instructions, disconnected the wiring from ice maker to freezer. Replaced ice maker component in reverse order.
I have removed the exsisting Ice maker with just a not driver for a tool. I had loosened the two top mount scews and removed the lower mount screw with a 11/32 nut driver (Yellow Handle) and removed the ice maker cradle assembly mount holes out of the exsisting mount clips. The new Ice Maker had come with extension cables and lever arms of differnt type. I used the exsisting lever arm from my ice maker. I also snapped in place my original cover onto the ice maker. Parts were correct match to a T. Reversed the order of removal and within 15 mins I had Ice. Great work Guys! Sincerely, Kurt Wilson Magnolia TX.
A friend did the installation and he said it was easy. Thanks so much for such quick service. I ordered the icemaker on a Friday and it was delivered and installed on Saturday.
I wasn't sure what part of the icemaker was bad -- the shaft from the motor broke but I didn't know if that was the problem or if the heater had gone bad, keeping the ice from coming out or if the control module was bad so it wasn't signalling the heater or what so I decided to replace everything and only do it once! Removed the old one held by a few screws, unclipping the wiring harness and installing the new one -- perfect fit. My wiring harness in the refrig plugged right into the new unit. Didn't have to use any supplied patch cords. The new unit started cycling in fifteen minutes. It doesn't make quite as much ice as the old one did but it certainly makes enough. Smooth sailing -- hassle free.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.