356584-1-S-Whirlpool-4172117           -Lower Dishrack Only
356584-1-S-Whirlpool-4172117           -Lower Dishrack Only 356584-2-S-Whirlpool-4172117           -Lower Dishrack Only 356584-3-S-Whirlpool-4172117           -Lower Dishrack Only http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/24XK6HQZ.gif

Lower Dishrack Only

PartSelect Number PS356584

This lower dishrack does not include the rollers, axles or corner splash guards. The color of the rack is no longer blue, but light ice gray.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $206.10
  • You Save

    $34.35
  • Your Price

    $171.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Silverware Basket

Part Number 396498

It does not have a cover for any of the sections, but there is a handle at either end so that you can quickly and easily remove it from your dishwasher.

$25.93
In Stock

Single Lower Roller Axle

Part Number 354746

This is the axle ONLY. Wheel is sold separately.

$4.80
In Stock

Single Roller Wheel

Part Number 354749

Sold Individually.

$2.73
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 11 reviews What's this?
1-5 of 11
 

73 of 137 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCarol from Darien, CT

Replaced the rollers on the new dishrack

Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!

Help other customers find the most helpful instructions.

Were these instructions helpful?

70 of 133 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerKathleen from Bergenfield, NJ

Bottom rack was rusty and prongs had broken off

With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 18 people found this instruction helpful

Parts Used

  • Lower Dishrack Only

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKathleen from Burlington, VT

Old rusting dish rack needed to be replaced

I replaced the rack of my old Kitchen Aid dishwasher which is AT LEAST 40 years old... maybe 50 but runs fine. I just unscrewed the wheels from the old rusty rack and attached them to the new rack and popped it in place. Very easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 33 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJohn from League City, TX

Replace top and bottom racks

The repair did not take long. Removed some of the parts from old racks which did not take too long to accomplish. Everything went together well. Very pleased with the new parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Lower Dishrack Only

Level of DifficultyDifficult

Time to do repair:1- 2 hours

ToolsPliers

CustomerMameve from Cambridge, MA

Replaced bottom dishrack on dishwasher and had ultimately to replace the wheels

Tried to get the old axles and wheels off old dishwasher but couldn't so ordered new axles and wheels--not easy to put on--needed pliers--but the worst part is the wheels don't glide as well as the ones we couldn't get off the old rack so-particually when the bottom rack is loaded--it is very hard to push in the rack and pull it out. You practically have to lift it. Very disappointed as in the hopes of making an improvement (replacing old rack with broken pieces that held dishes) it is now worse!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 11