| |
12 of 14 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerKathleen from Burlington VT
Old rusting dish rack needed to be replaced
I replaced the rack of my old Kitchen Aid dishwasher which is AT LEAST 40 years old... maybe 50 but runs fine. I just unscrewed the wheels from the old rusty rack and attached them to the new rack and popped it in place. Very easy!
|
8 of 11 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerCarol from Darien CT
Replaced the rollers on the new dishrack
Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!
|
4 of 5 people found this instruction helpful
Parts Used
Level of DifficultyDifficult
Time to do repair:1- 2 hours
ToolsPliers
CustomerMameve from Cambridge MA
Replaced bottom dishrack on dishwasher and had ultimately to replace the wheels
Tried to get the old axles and wheels off old dishwasher but couldn't so ordered new axles and wheels--not easy to put on--needed pliers--but the worst part is the wheels don't glide as well as the ones we couldn't get off the old rack so-particually when the bottom rack is loaded--it is very hard to push in the rack and pull it out. You practically have to lift it. Very disappointed as in the hopes of making an improvement (replacing old rack with broken pieces that held dishes) it is now worse!
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMary from Villaridge MO
Rusty lower rack on dishwasher
We Pulled the rollers off the old rack and replaced them on the new one.
|
9 of 22 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJohn from League City TX
Replace top and bottom racks
The repair did not take long. Removed some of the parts from old racks which did not take too long to accomplish. Everything went together well. Very pleased with the new parts.
|
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDennis from Boynton Beach FL
Diswasher parts worn out.
My parts really did not require tools to install , although the dishrack rollers may require some persuasion for someone with weak hands. The ease of ordering online and delivery was excellent. I will definately be using your service for all my appliance needs
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers
CustomerMichael from Little Falls NJ
The racks were rusting and staining the dishes.
The rack you sent me didn't have the plastic wheels on the bottom so I had to pry the old ones off and use them.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerKathleen from Bergenfield NJ
Bottom rack was rusty and prongs had broken off
With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerArdythe from Cherokee IA
Dishwasher 22 years old....have been told no longer built in this country....badly rusted tynes on the bottom rack, leaving rust spots on dishes.
Ready to slide in, except for removing rollers & bumpers from old rack & placing on the new rack. Husband did this very easily, in less than 15 minutes.
Dishwasher still in great working order after all these years, afraid to replace it with a lesser quality today.
Rack arrived in 4 days! Wonderful!
Only minor glitch...came white, instead of blue....but WHO CARES....fits beautifully. Very happy I decided to spend the money on the "old" dishwasher! (Would have done this sooner if I'd known parts were still available.)
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerlawrence from langhorne PA
I replaced the bottom dishrack in my diswasher including axles and wheels
I removed the old rack placed the new axles and wheels on the new rack and rolled it back into the dishwasher . It took about 5 minutes and was very easy.
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerMarlyn from Rockville MD
Old lower dishrack had missing/broken pieces
replaced old rack with new on
|