| |
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMichael from Howard Beach NY
Old water delivery tube brittle & full of holes poor pressure
Used a utility knife to cut the old tube . It was hard & brittle & full of holes. The new tube is not very flexible. Ran it under hot water to soften it up. I used liquid soap on the ends . This made the repair easy. Slipped right on, at both ends. Saved $200 by doing it myself. Took ten minutes.With more pressure from the new tube, the dishwasher is cleaning much better.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMICHELLE from TRENTON MI
Water tube rotted out and support cracked, no water going to top rack of dishwasher.
Pulled off old tube, applied small amount of lubricant to each end of tube, then just pushed ends together. Slide right on, attached new support and in less then five minutes, fixed. Dishwasher running like new.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerNancy from Boring OR
Dishwasher in rental missing parts
The Rubber water hose was missing and the upper wash/rinse blade wouldn't work. I thought no way am I going to be able to get parts for this 1993 dishwasher. Dishwasher was still in great shape, thought I would have to replace the dishwasher for a few hundred dollars. But it only cost me $31 for the 3 parts I needed. I was thrilled! I'm sure glad PartSelect had the missing parts. No tools were needed, I pushed the spray arm receiver onto the rubber water delivery tube. Then just slipped the rubber hose into place, done.
|