356311-2-S-Whirlpool-4171544           -Rubber Water Delivery Tube
356311-2-S-Whirlpool-4171544           -Rubber Water Delivery Tube 356311-1-S-Whirlpool-4171544           -Rubber Water Delivery Tube 356311-3-S-Whirlpool-4171544           -Rubber Water Delivery Tube http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/5CBOT6RO.gif

Rubber Water Delivery Tube

PartSelect Number PS356311

This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleaning quality of the dishes on the upper rack, and you will need to replace it.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Compare At

    $21.73
  • You Save

    $3.62
  • Your Price

    $18.11
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Upper Spray Arm Receiver

Part Number 356334

Order within the next 7 hrs and your part ships today!
$27.62
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 93 reviews What's this?
31-35 of 93
 

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerBeatrice from Mansfield, PA

Rubber water delivery tube and upper spray arm receiver

Rubber Water Delivery Tube and Upper Spray Arm Receiver had worn out on my 24+ yr. old Kitchen Aid Dishwasher. First time anything every had had to be done to this machine. It has been a work horse and still works great. The above parts had simply worn out. I found this site online and sent for the parts. My husband replaced them and followed the instructions of greasing the parts when replacing them. The job was done in minutes and the washer is working fine again.

The parts were shipped promptly and we had them in a matter of two or three days. Great experience with this company and will use again if the need arises.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDebra from Mentor, OH

Dishes in top rack were not getting clean

Took off old hose. It practically fell off.
Used a spoon to widen the ends of new hose and twisted on one end, then other end slipped on. Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerRosalind from Ithaca, NY

Dirty dishes discovered water tube old and cracked

Loved how easy it was to deal with you!
Part was clearly pictured and came immediately!
Very satisfying to fix it so easily.
Wondered why we waited so long!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerRobert from Northport, AL

Dishes in top of washer were not getting clean.

Our diskwasher is over 20 years old. The manufacture did not even list the model anymore. Googled - Kitchenaid parts old. Found your site and order the part on Sat. night. It arrived on Wed. Installed as follows that night.
After reading other reviews on how the job went and seeing that people had problems getting the tube to slide on the outlets I decided to take the rack completely apart so as to have unrestricted access to the connections. Would be easier to work the tube on to them.

First I removed the top rack by releasing the two retainers on the upper rack side rails which hold it up. Then I turned it with bottom up and released all of the plastic clips that held the bottom half of the rack in place. If a clip breaks you can use a nylon cable tie to replace it. Then I took out the screw that holds the metal water bar in place and removed it. Then I took out the screw that holds the plastic part that the water bar was mounted on off. Then with the outlet where the tube was to be mounted not connected to anything it was easy to slide the tube on it. I then was able to slide the tube on to the bracket at the back of the rack. Had to use a screw driver to help get the tube over the round outlet. Then worked it on to where it should be. Reassembled the top rack and put it back on the side rails and washed a load. It worked just like it did when it was new. Saved a service call $75.00 and only took about 30 minutes working at a slow pace.
Love it when everything works like it should.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Conklin, NY

The old tube had dry rotted and crumbly

I removed the old hose, I lightly coated the id of the new tube with vasoline, both ends, and then heated the oblong end with the hair dryer to soften it and it slid on with litte force. The round end installed without heating.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-35 of 93