356311-2-M-Whirlpool-4171544-Rubber-Water-Delivery-Tube.jpg
356311-2-S-Whirlpool-4171544-Rubber-Water-Delivery-Tube.jpg 356311-1-S-Whirlpool-4171544-Rubber-Water-Delivery-Tube.jpg 356311-3-S-Whirlpool-4171544-Rubber-Water-Delivery-Tube.jpg

Rubber Water Delivery Tube

PartSelect Number PS356311

This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleaning quality of the dishes on the upper rack, and you will need to replace it.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Leaking water.
  • Compare At

    $21.30
  • You Save

    $3.55
  • Your Price

    $17.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Upper Spray Arm Receiver

Part Number 356334

$27.08
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 93 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMike from Oakland CA

Water delivery tube to overhead sprayer punctured from age

I removed the roll out top wire rack of the dishwasher, turned it over and pulled the old punctured water supply tube off the force fit connectors on each end. I put a small amount of vaseline lubricant immediately inside the mouth of the new tube at each end. I pressed the ends of the new tube over the force fit connectors and tested them by shaking the pipe. I replaced the rack and fastened it into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJames R from Springfield MO

Rubber water tube disintegrating

I ran the tube under warm water and it was very easy to connect. I would have done it a lot sooner if I had known how easy it would be to find the part and install it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerSherrie from Mount Kisco NY

Cracked water delivery tube

Replaced the tube. It was relatively easy although it did take a small bit of squeezing/reshaping the newer rubber tubing to get it to fit on the outlet (it was a bit snug.)

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerTerrance from Burlington VT

Hose was badly cracked from old age

I removed the upper rack from the dishwasher by popping the two rack track stops out of the rack tracks. The old tube came off easily, and the new tube went on very nicely, after lubing each end with a dab of liquid dish soap. I put the rack back on its tracks , popped the track stops back in and my dishwasher was back in business.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerpatricia from buffalo NY

Rubber was rotted out

connected tube to spray arm and attached to back of dish wash machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Sagamore Hills OH

The rubber hose running to the upper shelf discharge fan rotted out.

It was 94 degrees that day so I set the rubber hose outside in the sun to loosen it up, make it more plyable. I then mixed up some soapy water and doused the ends of the hose with the soapy water and slid the hose right onto the fittings.

There was a small hole in the hose which was not discussed in the directions. I assumed the hole should be installed on the down side to let water drain out after the dishwasher is finished. This will reduce the chance of bacteria building in the hose.

I read the installation tips before I started and picked up the soap mix and heating up the hose before installation. Can be accomplished with a hair dryer if it is not 94+ degrees outside!!!

Thanks,

Jim

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard from Bozeman MT

Dry rotted rubber tube

pulled off the old and put on the new. Great pictures on website so I got the right part the first time. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBeatrice from Mansfield PA

Rubber water delivery tube and upper spray arm receiver

Rubber Water Delivery Tube and Upper Spray Arm Receiver had worn out on my 24+ yr. old Kitchen Aid Dishwasher. First time anything every had had to be done to this machine. It has been a work horse and still works great. The above parts had simply worn out. I found this site online and sent for the parts. My husband replaced them and followed the instructions of greasing the parts when replacing them. The job was done in minutes and the washer is working fine again.

The parts were shipped promptly and we had them in a matter of two or three days. Great experience with this company and will use again if the need arises.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerBarbara from Santa Rosa Beach FL

The old tube was worn out and had holes

Took the old one off then used canola oil to put on the inside of the tube and it went on easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRoyal from Elgin IL

The old rubber water delivery tube was cracked and leaking.

I removed the old tube. I rubbed vegetable oil on the inside of both ends. The new tube slipped on with no
problem, and that was the end of the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn from Marietta GA

Tube was worn out. Burned out really.

Was lucky the part was available. I put liquid detergent on both ends of tube, then slid each end onto each sleeve. Works great now!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAlfred C from Mt Pleasant PA

Part leaked due to a crack. & top rack dishes not being cleaned properly

Removed the old part. It came out with no problem
due to being brittle and cracked. This part was original to my 15 1/2 year old dishwasher.

Ran hot tap water in the sink and soaked the new "Rubber Water Delivery Tube" for about 5 min. I put a little dish washing liquid on dishwasher part where tube was to be slid onto. Including the soaking time,repair took less than 5 1/2 min.

I'm very pleased by the fact that my part arrived in a little over 1 1/2 days.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBill from Chelan WA

The old peice was wore out and had holes and kept falling off.

I just put 1 drop of hand soap in each end of the new hose , that let it slide on EZ.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customeranne from clinton MS

Rubber hose had holes in itt

I HEATED BOTH ENDS OF RUBBER HOSE AND APPLIED A SMALL AMOUNT OF VASELINE INSIDE OF TUBE AND IT SLID ON REAL EASY. IT TOOK LESS THAN 5 MINUTES TO FINISH THE TASK.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rubber Water Delivery Tube

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customermilka from brooklyn NY

Dishwasher had smoke

it was a very easy repair thank you

Help other customers find the most helpful instructions.

Were these instructions helpful?