| |
13 of 15 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
Customerbrett from newbury pk. CA
Old wheels were going away 1 by 1
I took the dishtray outside to the patio and removed all the old wheels and axles. Sipped some coffee and then snapped on all the new axles and wheels. It now rolls like new even when full of dishes. I,m glad I found your website again!
|
9 of 12 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerCarol from Darien CT
Replaced the rollers on the new dishrack
Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!
|
6 of 6 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers, Screw drivers
CustomerDarla from Thomasville PA
Bottom dishwasher rack kept getting hung up in dishwasher. Oven light burned out, one oven rack missing at time of home purchase.
It was a "snap" to repair diswasher wheels(snapped off the old and replaced witht the new ones) and bumpers(heated them in hot water first so as not to break them before snapping them into place)!
Oven rack simply needed to be placed into the oven.
Hardest part of this project was replacing the light bulb. Removed two screws that held glass lens/metal frame in place. Twisted bulb left to remove it. Glass bulb released itself from the metal base instead of coming out as one piece, so I had to disconnect the power source, then get plastic handeled pliers to remove the metal base that was still inside the socket. Once that was removed, the new bulb was placed into the socket, power was reinstated and "wa-lah!" there was light in the oven again! Hooray!
|
3 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from Mount Vernon NY
Broken roller wheels and axles
Removed broken axles by hand and installed new axles and wheels. The repair took less than 5 mins.
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from Woodbridge VA
Plastic roller axles were broken.
Snapped in new ones (8) by hand. I was amazed
how fast I was able to find this part online and the
ordering was easy and in a few days the parts
arrived. No hassle trying to explain to anyone what
part I needed. There were pictures of all parts
available. Ordering online, especially if you
know what you are looking for, is really the way to go.
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLinda from Moundsville WV
Roller axles had broken releasing wheels
I ordered 8 new axles and used old wheels. I broke off the remaining axle parts left on the wire lower basket with just my hands, and then popped on the new axles. This was done without tools; just needed significant pressure to pop the axles onto the coated wire. The wheels popped onto the axles with a little pressure. Make sure you have the right side of the wheel out. I simply looked at the remaining working wheels before install began to make sure which side goes out. Very easy install.
|
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerKathleen from Bergenfield NJ
Bottom rack was rusty and prongs had broken off
With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.
|
6 of 14 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsScrew drivers, Wrench(Adjustable)
Customerjudie from mays landing NJ
Interior drawers were off their rollers
pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and had to call a repairman to adjust the dishwasher and alighn it to open and close properly. but i did do good inside. i feel it was easy and a success. thank you for having the supplies for us to attempt to repair it on our own.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers
CustomerDeborah from Towson MD
Lower dishwasher rack wouldn't roll any longer.
Removed the old broken axles and last few
wheels. Needed pliers to help remove the
axles. Took a few minutes.
Put on the axles and popped on the wheels.
Threw out the old silverware basket
and put the new one in place,
Finished in approx 20 minutes.
I really thought I had to get a new dishwasher but then stumbled on your web site. Saw another woman's story about how her dishwasher was like new when she did the same replacements. She was RIGHT. I feel like I have a new dishwashwer. The parts were reasonably priced
and the shipping was VERY VERY QUICK. All
parts were correct.
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers
CustomerThomas from Great Falls VA
Bottom rack would not roll easily and often came off track
I just pulled out the rack and removed the eight existing roller wheels and roller axles. I was able to remove most of the roller axles with my fingers but needed pliers to remove a couple of them. I then snapped the new roller axles onto the rack and then the roller wheels onto the new roller axles and put the entire rack back in the dishwasher.
The lower rack now rolls smoothly and consistently no matter how many dishes we have piled into it. Also, it has not come off the tracks since replacing the roller axles and roller wheels.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerYvonne from St. Louis MO
Missing items
Simply replaced the wheels/axiles and brackets using functioning ones as template. No problem at all.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerTheslee from Sharon MA
Mom died, selling her house. Lower rack of dishwasher with only 2 out of 8 wheels
The website had great pictures, I compared the wheels I had and the broken axles with the pictures, and picked what I thought would match. They were perfect. I used pliers to pop the axle on, and my fingers to put on the wheels. It works perfectly now
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSuzanne from Houston TX
Rollers came off my bottom rack due to broken axles.
I ordered all new axles even though not all of them were broken - I figured it was just a matter of time. Ordered one new roller because one was missing, and an extra one just in case. Removed all old rollers and axles. A couple of them did not want to come off, so I "hit" them with a screwdriver. Put on all new axles and replaced the rollers. The whole project took about 10 minutes. SUPER EASY. CHEAP FIX FOR MY OLD DISHWASHER.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers
CustomerAnne from Sebastopol CA
A couple of axles disintegrated so the bottom dish rack wouldn't roll
I took out the bottom rack, turned it upside down, popped off the wheels and saved them and put on the new axles. It took a little doing to get the new axles snapped into place-they were stiff. I finally figured out how to use the pliers at the right angle to pop them on. Then the wheels popped right on and off I went.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customermichael from topeka KS
Roller axle broken, roller fell off
first-removed all axles from one side of rack. replace with new ones, replace rollers. repeat for other side of rack. VIOLA!!
|