354746-1-S-Whirlpool-4162321           -Single Lower Roller Axle
354746-1-S-Whirlpool-4162321           -Single Lower Roller Axle 354746-2-S-Whirlpool-4162321           -Single Lower Roller Axle 354746-3-S-Whirlpool-4162321           -Single Lower Roller Axle

Single Lower Roller Axle

PartSelect Number PS354746

Manufacturer Part Number 4162321
Manufactured by Whirlpool

This is the axle only. Wheel is sold separately.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $3.02
  • You Save

    $.50
  • Your Price

    $2.52
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Single Roller Wheel

Part Number 354749

Sold Individually.

$2.67
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 32 reviews What's this?
1-15 of 32
 

458 of 458 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Chlemsford MA

Roller axels were broken and wheels missing

pulled out the old broken axels and pushen in the new ones and then snapped in the wheels.

Help other customers find the most helpful instructions.

Were these instructions helpful?

363 of 365 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerWilliam from Washington DC

Replace roller axles, wheels and silverware basket

...popped out the old in with the new...could not have been easier!

Help other customers find the most helpful instructions.

Were these instructions helpful?

141 of 275 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsScrew drivers, Wrench(Adjustable)

Customerjudie from mays landing NJ

Interior drawers were off their rollers

pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and had to call a repairman to adjust the dishwasher and alighn it to open and close properly. but i did do good inside. i feel it was easy and a success. thank you for having the supplies for us to attempt to repair it on our own.

Help other customers find the most helpful instructions.

Were these instructions helpful?

75 of 138 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customerbrett from newbury pk. CA

Old wheels were going away 1 by 1

I took the dishtray outside to the patio and removed all the old wheels and axles. Sipped some coffee and then snapped on all the new axles and wheels. It now rolls like new even when full of dishes. I,m glad I found your website again!

Help other customers find the most helpful instructions.

Were these instructions helpful?

72 of 136 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCarol from Darien CT

Replaced the rollers on the new dishrack

Soaked the axles in warm water and installed them, then placed the roller wheel on the axle. A no-brainer!

Help other customers find the most helpful instructions.

Were these instructions helpful?

66 of 129 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerKathleen from Bergenfield NJ

Bottom rack was rusty and prongs had broken off

With a very upset husband. The wheels were difficult to take off, although after he got the hang of it he stopped breaking them. I had ordered 6 wheels and axles, should have ordered 8, but the ones he didn't break we could use again. Now, the old cutlery basket from the old rack does not fit into the new rack. Today I ordered a new basket after being told the manufacturer must have changed the rack. Hoping the new basket fits the new rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

64 of 125 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Mount Vernon NY

Broken roller wheels and axles

Removed broken axles by hand and installed new axles and wheels. The repair took less than 5 mins.

Help other customers find the most helpful instructions.

Were these instructions helpful?

69 of 193 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerDarla from Thomasville PA

Bottom dishwasher rack kept getting hung up in dishwasher. Oven light burned out, one oven rack missing at time of home purchase.

It was a "snap" to repair diswasher wheels(snapped off the old and replaced witht the new ones) and bumpers(heated them in hot water first so as not to break them before snapping them into place)!

Oven rack simply needed to be placed into the oven.

Hardest part of this project was replacing the light bulb. Removed two screws that held glass lens/metal frame in place. Twisted bulb left to remove it. Glass bulb released itself from the metal base instead of coming out as one piece, so I had to disconnect the power source, then get plastic handeled pliers to remove the metal base that was still inside the socket. Once that was removed, the new bulb was placed into the socket, power was reinstated and "wa-lah!" there was light in the oven again! Hooray!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from Woodbridge VA

Plastic roller axles were broken.

Snapped in new ones (8) by hand. I was amazed
how fast I was able to find this part online and the
ordering was easy and in a few days the parts
arrived. No hassle trying to explain to anyone what
part I needed. There were pictures of all parts
available. Ordering online, especially if you
know what you are looking for, is really the way to go.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Single Lower Roller Axle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLinda from Moundsville WV

Roller axles had broken releasing wheels

I ordered 8 new axles and used old wheels. I broke off the remaining axle parts left on the wire lower basket with just my hands, and then popped on the new axles. This was done without tools; just needed significant pressure to pop the axles onto the coated wire. The wheels popped onto the axles with a little pressure. Make sure you have the right side of the wheel out. I simply looked at the remaining working wheels before install began to make sure which side goes out. Very easy install.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Single Lower Roller Axle

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customerconnie from Longboat Key AL

Wheels on dishwasher rack falling off and apart, so I couldn't roll the bottom rack in and out

i pulled the rack out, took off the old parts then added the new ones. it was quick and simple. i needed no tools and my package of parts arrived quicker than i thought. thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerThomas from Great Falls VA

Bottom rack would not roll easily and often came off track

I just pulled out the rack and removed the eight existing roller wheels and roller axles. I was able to remove most of the roller axles with my fingers but needed pliers to remove a couple of them. I then snapped the new roller axles onto the rack and then the roller wheels onto the new roller axles and put the entire rack back in the dishwasher.
The lower rack now rolls smoothly and consistently no matter how many dishes we have piled into it. Also, it has not come off the tracks since replacing the roller axles and roller wheels.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerYvonne from St. Louis MO

Missing items

Simply replaced the wheels/axiles and brackets using functioning ones as template. No problem at all.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerTheslee from Sharon MA

Mom died, selling her house. Lower rack of dishwasher with only 2 out of 8 wheels

The website had great pictures, I compared the wheels I had and the broken axles with the pictures, and picked what I thought would match. They were perfect. I used pliers to pop the axle on, and my fingers to put on the wheels. It works perfectly now

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSuzanne from Houston TX

Rollers came off my bottom rack due to broken axles.

I ordered all new axles even though not all of them were broken - I figured it was just a matter of time. Ordered one new roller because one was missing, and an extra one just in case. Removed all old rollers and axles. A couple of them did not want to come off, so I "hit" them with a screwdriver. Put on all new axles and replaced the rollers. The whole project took about 10 minutes. SUPER EASY. CHEAP FIX FOR MY OLD DISHWASHER.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 32