11742283-1-M-Whirlpool-WP4157180-Suface Burner Ignition Switch
Part Location Diagram of WP4157180 Whirlpool Suface Burner Ignition Switch
See part 18 in the diagram
( Grid squares measure 1x1 inch )
11742283-1-S-Whirlpool-WP4157180-Suface Burner Ignition Switch 11742283-2-S-Whirlpool-WP4157180-Suface Burner Ignition Switch 11742283-3-S-Whirlpool-WP4157180-Suface Burner Ignition Switch Part Location Diagram of WP4157180 Whirlpool Suface Burner Ignition Switch
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Suface Burner Ignition Switch WP4157180

 Fits your 1SF014BEN1!
★★★★★
★★★★★
1 Review

Rated by 4 customers 

Really Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 65.30
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 1SF014BEN1!
PartSelect Number PS11742283
Manufacturer Part Number WP4157180
Manufactured by Whirlpool
Product Description

Suface Burner Ignition Switch Specifications

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Amana, Whirlpool, Caloric, Roper.
Part# WP4157180 replaces these:
AP6009138, 0088874, 074552-00, 07455200, 4157180, 88874, Y0088874, Y07455200, Y88874
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
4.0
Filter By Rating:
  • 5 Stars
    0
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Forrest B - December 24, 2019
  Verified Purchase
Works perfectly!
Easy to find part. Works perfectly. I hope it lasts more than a couple of years. That’s why I only give it a 4. I've replaced this exact piece one about 3 years ago. Given that the other three I have are originals, I’d hope this would last more than 5 years.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Right front gas burner ignitor wouldn't spark
I used the experience of another user posted on your web site. I removed all the gas control knobs and then I followed his instructions about removing the four phillps head screws that held the front plate in place. Once I had it loose and flipped the plate out, it was simple to disconnect the old ignitor switch and install the new one. Simply reversing the process put the range back in proper order. Took a little over 15 minutes to accomplish.
Read less
  • Joseph from Lake George, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left rear burner would not ignite
Removed the burner plates. Lifted up the range top. Removed the knobs. Unbolted the 2 rounded nuts at top of face plate. Removed the 4 screws that hold the face plate in place from behind. Un plugged the old switch and plugged in the new one and bam! The burner worked. Thanks, Super fast shipping! The part was here in less than 36 hours. John, N.J.
Read less
  • John from Perth Amboy, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ignitor did not spark when turning the know
Had to remove the 4 range knobs, and the oven knob and then the facie. Two screws under the end caps and two on each side from the back on each end. Design defect: one of these screws which attaches through the frame to the facie also attaches the support which holds up the range top. Take that one off last. Remove the two wires that attach to the oven light switch. After detaching the power supply to the defective ignition unit, it just pulls right off. Push the new switch on over the knob shaft and reassemble.
Read less
  • Richard from Lansing, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
two burner ignitors would not function on cook stove
1. ordered two new switches
2. installed switches
3. all ignitors work

Really appreciated the pictures of the parts--made selection very easy.
  • Warren from Las Cruces, NM
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennise Marie
February 22, 2018
Is this part compatible with the above make and model stove?
For model number Caloric Oven RMA339-UN
PartSelect logo
Hello Dennise, thank you for your question. Yes, part number Surface Burner Ignition Switch WP4157180 is the correct replacement part for your appliance. I hope this helps!

Was this helpful?
Thank you for voting!
  • 1
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742283
Manufacturer Part Number: WP4157180
Brand
Model Number
Description
Whirlpool
1SF014BEN0
Range
Whirlpool
1SF014BEN1
Range
Whirlpool
1SF014BEN2
Range
Whirlpool
1SF014BEW0
Range - Freestanding, Gas
Whirlpool
1SF014BEW1
Range - Freestanding, Gas
Whirlpool
1SF014BEW2
Range - Freestanding, Gas
Whirlpool
1SF034PEN0
Range
Whirlpool
1SF034PEN1
Range
Whirlpool
1SF034PEN2
Range
Whirlpool
1SF034PEW0
Range - Gas
Whirlpool
1SF034PEW1
Range - Gas
Whirlpool
1SF034PEW2
Range - Gas
Amana
2917
Range - GAS RANGE
Amana
2920A
Range - GAS RANGE
Amana
2927
Range - GAS RANGE
Amana
2930A
Range - GAS RANGE
Amana
2940A
Range - GAS RANGE
Amana
2950A
Range - GAS RANGE
Amana
2960A
Range - GAS RANGE
Amana
2967
Range - GAS RANGE
Kenmore
9607022190
Range
Kenmore
9607022191
Range
Kenmore
9607022890
Range
Kenmore
9607022891
Range
Kenmore
9607052190
Range
Kenmore
9607052890
Range
Kenmore
9607412190
Range
Kenmore
9607412890
Range
Amana
AGC585E
Range
Amana
AGC585E P1142922N
Range - Amana Range/Stove/Oven Model AGC585E P1142922N (AGC585EP1142922N) Parts
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Suface Burner Ignition Switch
$ 65.30
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.