Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Barbara
March 4, 2024
Light turns on/off or dimmed. It seems to be a contact problem. How do take off a blue connector and reassamble it back? Thanks, Barbara
For model number MBN380186
Hello Barbara, thank you for your inquiry. The Refrigerator Light Board Assembly is PS3533582. Open the doors and use a Phillips head screwdriver to remove the screws securing the light assembly. Pull the assembly down and forward and disconnect the wire harness. Next, use a small flat head screwdriver to help pry off the cover. Remove the screws securing the old light board and pull the board out. Install the new light board by first inserting the wire harness through the hole in the housing, then position the new board and secure it with the screws. Realign the lens cover and snap it into Place. Re install the light assembly by connecting the wire harness and inserting the assembly tabs into the slots in the liner replace the screws to secure it. Good luck with this repair.
