The wire harness is NOT available separately. Refrigerator ice maker kit AEQ36756901 is an original equipment manufacturer (OEM) part that fits some refrigerators in these series: Kenmore 795; Kenmore Elite 795; and LG LFX, LMX and LSC.
Ice maker AEQ36756901 receives water from the water inlet, holds the water in the ice mold until the water freezes solid and then automatically ejects the ice and refills to continue the process until the ice storage in is full.
This ice maker kit contains the complete ice maker, housing and control device.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker not making ice | Ice maker won’t dispense ice
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James M - October 28, 2023
Verified Purchase
I’ve maker failure
Bought new ice maker to replace the old one,
Making ice again!
★★★★★
★★★★★
Anthony V - November 24, 2022
Verified Purchase
Easy Repair
I am always extremely cautious of websites I haven't heard of, but gambled and ordered the part, mostly because it was cheaper than buying a new fridge...
Arrived very quickly, and was the exact part I needed, and most importantly my wife is happy!
I'll be buying from you again in the future.
★★★★★
★★★★★
James R - August 18, 2021
Verified Purchase
Love it
Easy to install and works great ??
★★★★★
★★★★★
Bob L - May 13, 2021
Verified Purchase
ice maker assembly replacement
The part was here in no time. it was an exact replacement part, so it was basically plug and play to get the ice maker working. PartSelect was great to work with.
★★★★★
★★★★★
Donald M - December 25, 2020
Verified Purchase
Plug and Play.
I had my doubts about getting the correct part and make an error free installation - however all went well and the ice maker is working great.
★★★★★
★★★★★
John R - March 26, 2019
Verified Purchase
very easy to replace the old part with the new ice maker
the part was exactly what I needed
★★★★★
★★★★★
Court W - March 19, 2019
Verified Purchase
Exactly as described
Quick delivery, exactly as described and parts select was awesome at picking the right part. Love this site.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice maker bail frozen. Chose to replace the entire assembly
Examined old ice maker. It is held by some Philips screws. There are many screws you don't need to unscrew so look carefully. Then disconnected th dual in line connector. There is a little push tab to squeeze to release. Then the ground is connected with a screw. It's a little hard to see but unscrew that. My replacement came with no
... Read more instructions or screws so try not to drop the screws down in the netherlands of the fridge. The hardest part was maneuvering the icemaker to reattach the power and ground. Even with that pretty straight forward replacement.
Read less
John from HILLSBORO, OR
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
28 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mitchell
March 19, 2018
My LG fridge, i get water out of the water dispenser, but the water does not fill the ice maker. It's been intermittent, it works great for a few days, then stops filling water. I'm thinking it might be a moody solenoid valve? Is that what i need? Thank you
For model number LSC27950ST
Hello Mitchell, thank you for your question. It sounds like the issue is with the inlet water valve part number 5221JA2006D. The water valve brings water to the dispenser and the icemaker. It is possible that one side of the valve is working properly and the other is working intermittently. I would recommend replacing the water valve first to see if that fixes the issue! I hope this helps!
15 people found this helpful.
Was this helpful?
Thank you for voting!
Jose
January 8, 2019
Water at the door dispenser the flow is weak, no pressure and the ice maker is not working.
For model number LMX25981ST
Hello Jose, Thank you for the question. This sounds like the Water Valve might be defective, PartSelect Number: PS3536019. The valve may not be opening enough to allow water to flow through to the ice maker and dispenser. Hope this helps, good luck with this repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Suzanne
August 26, 2019
Hi the ice maker is not refilling , it dispenses water. I turned off the icemaker and then turned it back on and it worked for a day. So i know it works just not sure which part isnt working right.
For model number LFX25975ST/01
Hi Suzanne, thank you for your question. There are two parts that you should check for this issue. The first part to test would be your water inlet valve. The valve has two solenoids that control either the dispenser or the ice maker. Even if your dispenser is working the ice maker solenoid may not be and vise versa. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is testing correctly then you should look into your ice maker being the issue. I hope that helps. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
ROGER
February 22, 2018
The bail shut off arm in the ice maker does not rise.
For model number LFX25960TT
Hi Roger,
Thank you for your question. Try lifting the arm all the way into the locked position. Check the arm is supported on both ends. If it is not securely in place, the ice maker will not work correctly. If the arm continues not to work correctly, you will need to either replace it or the ice maker. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jack
May 27, 2019
My LG ice maker is making ice but it won't dispense the ice into the ice bucket. The feeler arm in always up even when the ice bucket is empty.
For model number LFX21960ST
Hello Jack, thank you for inquiring. For this symptom you will want to replace either the Ice Bucket Assembly part PS3526348 or the Ice Maker Assembly part PS3532293. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
June 20, 2019
Ice maker quit working. Water dispenser works. Recently upgraded our water filtration system that feeds into the refrigerator. We want ice. Thanks.
For model number LMX25981ST
Hello Richard, thank you for writing. For this symptom you will want to consider either the Water Inlet Valve Assembly part PS3533117, or this Ice Maker Assembly part PS3532293 for your model. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mike
July 18, 2023
can not find the part that drives the Ice Dispenser, my Model must have superseded. Makes Ice but will not dispense
For model number LFX25947SW/06
Hi Mike, thank you for getting in touch. We have researched the model and would suggest checking the ice maker and auger motor assembly, part number PS12715515. We hope this helps!
I just replaced the ice maker as the feeler arm would not go down. Once i changed the ice maker the same thing is happening. The ice maker makers ice cubes but won't dispense as the feeler arm stays up.
For model number LFX21960ST
Hello Kim, thank you for inquiring. For this symptom you will want to replace either the Ice Bucket Assembly part PS3526348 or the Ice Chute Door part PS3525879. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Amber
February 28, 2024
The ice maker arm stays up after the ice is dropped and the assembly refilled. After the water is frozen, another cycle will begin only after I push the arm down again. Can you tell me if this part AEQ36756901 properly fits this LG model?
For model number LFX25960ST
Hi Amber, Thank you for writing. Yes, the Ice Maker listed for this model is Manufacturer Part Number AEQ36756901. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Keith
January 29, 2018
I replaced the complete ice maker in the refrigerator. Un-plugged power from wall of the unit to reset. Will the metal arm automatically reset itself? In the box it is under the ice maker is this correct?
For model number AEQ36756901
Hi Keith, Thank you for the question. Sounds like you are referring to the bail shut off arm. The arm is pushed up as ice is made and falls when the ice is dropped. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
