Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/LG/148993-3.gif
See part K310 in the diagram
http://www.partselect.com/Schematics/LG/148993-3.gif

Lint Filter

PartSelect Number PS3531962

The lint filter is designed for use in your dryer. The function of the lint filter is to catch lint and debris during the operation of the dryer. If your old lint filter is old or damaged, or there are marks left on your clothes at the end of the dry cycle, you will need to replace it with this part. This part is approximately 12 inches in width by 11 inches in height. Many of our customers have rated this repair as very easy. To complete the repair, simply remove the old filter, clean up any remaining lint and debris, and install the new filter. NOTE: As per manufacture - due to a redesign you MAY also have to change the cover and filter guide.

This part works with the following brands: Kenmore, LG.

This part works with the following products: Dryer.

This part fixes the following symptoms:

  • Marks left on clothes.

Compare At

$37.14

You Save

$6.19

Your Price

$30.95
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

16 of 38 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: David from Annapolis, MD

Filter parts chipped - replaced

Removed existing parts using screwdriver, positioned new parts in dryer and re-inserted screws, tightened - done. Piece of cake, even for someone who cannot saw a straight line with a chop saw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Kevin from FARMINGVILLE, NY

Lint filter and cover guide melted which was ripping up some clothes

Just unscrewed four screws. One piece stays behind which is a sensor then pull up on it, put it back in the same way, put the four screws back in and it was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2