Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Francois
December 7, 2018
The serial number on my old pc board is 687w1noo2e will the one you listed fit my range?
For model number Lre30453st/01
Hi Francois, thank you for your question. I have linked the main PCB down below for you. I hope that helps. Good luck with your repair.
Replaced dual burner element on stove, the size select able one, burner still does not come on. Looking at parts it appears it could be one of two other things. The pcb sub assembly,part no. Ebr74632605. Or transformer power,part no. 6170w1g037a. All other burners work fine.
For model number LRE30453SW/01
Hello Ray, thank you for your inquiry. If the element itself has been replaced, chances are the issue is stemming from a malfunctioning surface element board, PartSelect number PS3530114. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rick
November 26, 2021
I have one burner that comes on irregularly. I here the relay in the pc board energizing regularly but the burner does not always come on when energized. I think the relay in the pc board is bad or worn out. What do you think. What is the correct part number for this item. Thank You.
For model number Ler30453SW/2
Hello Rick, thank you for your question. We have researched the model you have provided, and we would suggest the PCB Assembly, part number PS6012667. We hope this helps!
One segment of the led display is not working, what part do i need?
For model number LRE30453SB
Hello Kirk, thank you for contacting us. Yes, it could be the pcb assembly. It may also be the touch pad as well. You can test these with a multi meter to determine which is at fault. Good luck with the repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
