Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Fekri A - June 12, 2020
Verified Purchase
good
it's work but your it not coming in time you take money for fast delivery it take long time
★★★★★
★★★★★
Kevin H - May 21, 2020
Verified Purchase
Same part for LG and Kenmore
This LG part fits Kenmore dryer made in Vietnam. Works perfect!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Te error
Change the thermistor
Luis from LEHIGH ACRES, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
January 25, 2022
How do I replace thermistor on LG WM0642HW washer?
For model number WM0642HW
Hello Tim, Thank you for contacting us. First, unplug the power cord and shut off the water supply next remove the hot and cold water supply lines from the inlet valve be prepared for some water to spill out. Carefully tip the washer back so it rests on the rear panel. Then disconnect the thermistor wire connector remove the screws securing the thermistor to the outer tub untwist the retaining wire and remove the old part install the new thermistor by aligning it on the outer tub. Replace the screws to secure connect the wire connector to the new thermistor and secure it with the retaining wire return the washer to its upright position reattach the hot and cold water supply lines to the inlet valve with the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use. We hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Jim Baerwald
February 28, 2019
How do i access the thermistor on thes washer?
For model number Tromm wm2277hw
Hello Jim, Thank you for contacting us. First, unplug the power cord and shut off the water supply next remove the hot and cold water supply lines from the inlet valve be prepared for some water to spill out. Carefully tip the washer back so it rests on the rear panel. Then disconnect the thermistor wire connector remove the screws securing the thermistor to the outer tub untwist the retaining wire and remove the old part install the new thermistor by aligning it on the outer tub. Replace the screws to secure connect the wire connector to the new thermistor and secure it with the retaining wire return the washer to its upright position reattach the hot and cold water supply lines to the inlet valve with the repair completed turn the water supply back on plug the power cord back in and your washer should be ready for use. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
