ICE MAKER ASSEMBLY,KIT 5989JA0002Y

Hello Robert, Thank you for the question. This is just the Ice Maker. The Valve and Tubing ect. are sold separate. We hope this helps!

Hello Eric, Thank you for the question. Looks like the wire harness is different on each. The Ice maker for the model number provided is Manufacturer Part Number 5989JA0002X. Hope this helps!

Hi Tim, Thank you for your question. If your ice maker is making a humming sound, it may not be getting water from the water inlet valve. To verify if the water inlet valve is working, you will need to inspect it. Before you inspect and test the water inlet valve, please unplug the refrigerator from the electrical outlet. Remove the rear access panel and locate your water inlet valve, it is usually found near the bottom. Before removing the water inlet valve, look for any signs of leaks or loose connectors in the valve inlet supply. If no issues are found, inspect the valve body for any cracks or damage. Inspect the outlet tubing for any brittle tubing, abrasions, cracks, or any other damage. If you do not locate any leaks, disconnect the water inlet valve and remove it from the refrigerator to test it. Set your multimeter to the Rx1 setting and touch the terminals with the probes. You are testing for continuity and should receive a reading of 200 to 500 ohms. If you receive any other reading, you need a replacement water inlet valve. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hello David, thank you for your question. Yes, the icemaker comes with the ice tray where the water sits to freeze. Per your model number the icemaker is PartSelect Number PS3528723, not the one that was referenced. I hope this helps.

Hi Bill, thank you for contacting us. We have found that there is no water filter in your model. We hope this helps!

Hi Bob, Thank you for your question. Before we can provide you with information on the mounting hardware and the water guide spout, we will need the model number from your refrigerator. We have included a link from our website that you may use to find the model number on it. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!

Hello Bruce, thank you for your question. Our first recommendation would be the Defrost Thermostat PS3529338 and if that doesn't fix it, you can try replacing the Icemaker PS3528723. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Hi Thomas, Thank you for your question. The LED lights are used to indicate cube size. Below the LED lights, you will find a small hole that you can insert a small item which will allow you to change the size of the ice cubes. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!

Hello Michael, thank you for reaching out. The control board for the ice maker is not sold individually and comes as a part of the ice maker assembly, part number PS7785531. In order to replace the control board, you would need to replace the whole ice maker assembly. We hope this helps!

Hi Don, thank you for reaching out. Follow the following instruction to reset the icemaker: 1. First, locate the on/off switch on your refrigerator. It is usually on the left side of the unit. 2. Press the ice on the icon and run a cycle. If the cycle does not start, you need to remove the bin. 3. Reattach the bin and turn off the breaker for 30 seconds. 4. Turn the unit back on and let it sit for 6–8 hours before it starts to produce ice. We hope this information helps!