Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jim O - April 14, 2021
Verified Purchase
Easy
Order showed up quick and was exactly what I needed
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Both cams had broken off the gasket retainer strips
Check YouTube, but no one shows all the details. Need to swap hinges and spring from old retainer to new retainers by removing screw at bottom of hinge, then removing rod with small screwdriver to poke the rod out. I laid the old and new side by side and did swap to ensure proper orientation. Attach cams before sliding gasket retainer bac
... Read morek into gasket, I used a few drops of liquid soap as lubricant on the retainer to help it slide in. Very important to ensure the edge of the retainer is tucked behind the door edge or else things will not fit correctly. I did it a few times before I got it right, but didn’t break anything else. Good luck.
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Nick
October 26, 2017
Show how to install, thank you
For model number 795.7840
Hi Nick, Thank you for the great question. Open the door and pop off the trim covering the gasket retainer, it will just pop off by hand.Peel the gasket lip back a bit to expose the gasket retainer. At the top and bottom of the retainer you will see a channel you can fit a flat head screw driver into and pop the retainer out a bit. Use a Phillips head screw driver to remove the screw at the top of the retainer that holds the cam shaft in place. Pull the cam shaft from the retainer after the screw is removed. Inset the new cam shaft and replace the screw. Make sure the retainer is behind the lip of the gasket and tuck the retainer spring back into the door liner and snap the retainer back into place. Snap the door trim back on and you will be set. Good luck with the repair !
10 people found this helpful.
Was this helpful?
Thank you for voting!
Johnny
February 20, 2018
I'm not sure how this happened, but the left door cam shaft is sloppy and loose. I assumed it's broken or not secure. I believe it's purpose is to help secure the door closure. Is replacement the same for my model. Thanks
For model number LFC20760ST
Hi Johnny,
Thank you for your question. Yes, this is the same replacement part for your appliance. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gene
August 5, 2018
Are there instructions on replacing this part on and LG refrigerator? Thanks
For model number LFC23760SB
Hello Gene, thank you for your question. Open the door and pop off the trim covering the gasket retainer, it will just pop off by hand.Peel the gasket lip back a bit to expose the gasket retainer. At the top and bottom of the retainer you will see a channel you can fit a flat head screw driver into and pop the retainer out a bit. Use a Phillips head screw driver to remove the screw at the top of the retainer that holds the cam shaft in place. Pull the cam shaft from the retainer after the screw is removed. Inset the new cam shaft and replace the screw. Make sure the retainer is behind the lip of the gasket and tuck the retainer spring back into the door liner and snap the retainer back into place. Snap the door trim back on and you will be set. Good luck with the repair !
Was this helpful?
Thank you for voting!
Anna
June 18, 2019
In reference to the cam shaft is there one for the right side and the left side?Or are both the same?
For model number LFC20760SB
Hi Anna, thank you for your question. There is a left and right side. This part you have questioned on is the right. I have linked the left down below. Good luck with your repair.
I am looking for the part that #4430jj2005a(#ps3522959) cam shaft attaches to. The cam shaft fell out and there is some plastic with a screw in it on the end of the cam shaft.
For model number 795.77304601
Hello Tom, thank you for writing. The part you are referring to is the Gasket Holder part PS3524318 for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
Lucille
August 12, 2022
Right side shelf adjacent to meat left side drawer will not stand sturdy as previously did. HELP!
For model number 79577253601
Hello Lucille, thank you for your question. We believe you may be looking for a rail. The rail on the Right side of the drawer is PS3524811 and the rail on the Left side of the drawer is PS3586244. You may need to call in to verify positioning with an agent and customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
William
September 9, 2023
The right side cam shaft is broken. The camshaft is fine but, the retainer it attaches to is broken. I don't know what it is called other than the door cam shaft retainer. Would like to know part name and picture so I can order it and replace the broken one
For model number 795 78403 801
Hi William, thank you for reaching out. This part you are referring to is the right-side door gasket retainer, part number PS3524318. The camshaft does attach to the top of this part. You can view the picture of the right-side door gasket retainer at the link attached. We hope that helps!
How do I install 4430JJ2005A at top of door to keep it closed ?
For model number LG Fridge LRFD22850ST
Hi John, thank you for reaching out to PartSelect Canada. Open the door and pop off the trim covering the gasket retainer, it will just pop off by hand. Peel the gasket lip back a bit to expose the gasket retainer. At the top and bottom of the retainer you will see a channel you can fit a flat head screw driver into and pop the retainer out a bit. Use a Phillips head screw driver to remove the screw at the top of the retainer that holds the cam shaft in place. Pull the cam shaft from the retainer after the screw is removed. Inset the new cam shaft and replace the screw. Make sure the retainer is behind the lip of the gasket and tuck the retainer spring back into the door liner and snap the retainer back into place. Snap the door trim back on and you will be set. Good luck with the repair !
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
