7785070-1-M-LG-4280EN4001D-BEARING,BALL
Part Location Diagram of 4280EN4001D LG BEARING,BALL
See part K122 in the diagram
( Grid squares measure 1x1 inch )
7785070-1-S-LG-4280EN4001D-BEARING,BALL 7785070-2-S-LG-4280EN4001D-BEARING,BALL Part Location Diagram of 4280EN4001D LG BEARING,BALL
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

BEARING,BALL 4280EN4001D

 Fits your WM1333HW!

Rated by 1 customer 

Really Easy 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

$ 49.27
  On Order
Get FREE EconoShip on orders over $100! T&C apply
 Fits your WM1333HW!
PartSelect Number PS7785070
Manufacturer Part Number 4280EN4001D
Manufactured by LG
Product Description

BEARING,BALL Specifications

This is known as a tub bearing or a rear bearing, and it is part for your washing machine. The function of this bearing is to be a support for the spin basket shaft that is located at the back of the washer tub. This model is sold individually and measures to have a 2.5-inch outer diameter. As this bearing is very difficult to install, the manufacturer recommends completely replacing the rear tub and bearing assembly. If you are only installing the rear bearing, consider replacing the seal and the other bearing as they wear out together.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 4280EN4001D replaces these:
4280EN4001N, 4280EN4001S, 4280EN4001Y, 4280FR4048E, AGF76083931
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bearing seal out causing bearings to get wet and very noisy
Watched a short video to figure out to remove panels. After panels were off I removed as much as I could from the inside of the machine. This was not completely necessary however for an extra half hour it made inspection, cleanup and removal of tub housing out the front of the machine much easier. Once out, I split the two halves of the outer basin and sprayed the spider shaft with penetrating oil. Using a brass drift I did have to get a bit aggressive to drive spider shaft out, then I used a heavy metal punch to hammer out the bearings. For those who may not know using brass or a soft metal will keep from damaging reusable parts. At this point it was cleanup time, with dish soap I scrubbed the two halves of the outer basin and the wash basin itself then used emery cloth on the bearing casing and spider shaft. I am a firm believer if u take the time to cleanup properly things go back together much easier. At this point I began to reassemble, replacing tub bearings and seal, the wash basin then putting the two halves of the outer basin back together. I strongly recommend replacing gasket for the halves of the outer basin, for as much as it takes to get there it is money well spent to up the chances of a leak free system. Now with the wash tub back together it was time to reset the tub and hook everything back up. I skipped a lot of steps but if a person pays attention, takes pictures if they have to, even numbers lines with a sharpie it is a very easy repair. Very easy but very time consuming. I am DIY’er, in all I spent about ten hours over two days to do this job. Thus being said I am very particular spent a lot of time cleaning, scrubbing looking at as many wear points and checking for rubbed wires. Hope this helps someone out there, definitely not a strong writer or like doing it. Oh one other thing, I ordered the shocks on the bottom side of wash tub just because I guess not thinking they were bad just thinking I could help tune it up. Was surprised to find the old ones were completely shot, was glad I ordered new ones. After repairs, noise is gone and machine is quiet again. Thank you, your website is very easy to find parts and order.
Read less
Other Parts Used:
Locking Pin BEARING,BALL BEARING,BALL Gasket Rear Tub Gasket Shock Absorber Kit
  • Todd from STOCKTON, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
66 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Rear Tub Gasket
$31.60
$31.60
  In Stock
Gasket
$30.78
$30.78
  In Stock
BEARING,BALL
$63.71
$63.71
  In Stock
GASKET
$21.35
$21.35
  On Order
BEARING,BALL
$71.38
$71.38
  In Stock
DAMPER ASSEMBLY,FRICTION
$41.87
$41.87
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS7785070
Manufacturer Part Number: 4280EN4001D
Brand
Model Number
Description
LG
40311
Washer - Washer
LG
40318
Washer - Washer
LG
40441
Washer
LG
40518
Washer - Washer
LG
41028
Washer - Washer
LG
41029
Washer - Washer
LG
41172
Washer Dryer Combo - Washer-Dryer
LG
41182
Washer - Washer
LG
41372
Washer Dryer Combo - Washer-Dryer
LG
41373
Washer - LG Washing Machine Model 41373 Parts
Kenmore
79628862700
Washer - Kenmore Washing Machine Model 796.28862700 (79628862700, 796 28862700) Parts
Kenmore
79628869700
Washer - Kenmore Washing Machine Model 796.28869700 (79628869700, 796 28869700) Parts
Kenmore
79629872700
Washer - Kenmore Washing Machine Model 796.29872700 (79629872700, 796 29872700) Parts
Kenmore
79629877700
Washer - Kenmore Washing Machine Model 796.29877700 (79629877700, 796 29877700) Parts
Kenmore
79641172210
Washer - WASHER
Kenmore
79641172211
Washer - WASHER
Kenmore
79641182310
Washer - WASHER
Kenmore
79641182311
Washer - WASHER
Kenmore
79641282310
Washer - WASHER
Kenmore
79641282311
Washer - WASHER
Kenmore
79641372210
Washer - WASHER
Kenmore
79641372211
Washer - WASHER
Kenmore
79641373210
Washer - WASHER
Kenmore
79641373211
Washer - WASHER
Kenmore
79641379210
Washer - WASHER
Kenmore
79641379211
Washer - WASHER
LG
F12A1FDP
Washer
LG
F12A4FNP7
Washer - LG Washing Machine Model F12A4FNP7 Parts
LG
F1403FD9
Washer - LG Washing Machine Model F1403FD9 Parts
LG
F1403RD
Washer - LG Washing Machine Model F1403RD Parts
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
BEARING,BALL
$ 49.27
  On Order
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.